|
[Sponsors] |
August 14, 2012, 06:59 |
contours at different cross-sections
|
#1 |
New Member
shayan
Join Date: Jul 2012
Location: Australia
Posts: 27
Rep Power: 13 |
Hi Dears
1.How can I get the contours at different cross-sections for a 3-D curvature? 2.Which mesh should I use to have the contours preciser and clear? Thanks |
|
August 14, 2012, 07:09 |
|
#2 |
Member
Martin H.
Join Date: May 2009
Posts: 31
Rep Power: 16 |
hi,
is think somehwere in the display->views menu there is a 'overlay' option that you can click. basically it works like this: - create two faces for which you want to have the contours displayed -display the contour on the first face - enable overlay in the views menu - display the second contour now you have two contours in one picture that you can export. if you need the grid to be displayed as well, you should do this first before overlaying. regards |
|
August 14, 2012, 08:07 |
|
#3 | |
New Member
shayan
Join Date: Jul 2012
Location: Australia
Posts: 27
Rep Power: 13 |
Quote:
So you mean that I should create my geometry in Gambit again included the faces which the contours are needed? |
||
August 14, 2012, 08:26 |
|
#4 |
Member
Martin H.
Join Date: May 2009
Posts: 31
Rep Power: 16 |
hi,
no, you dont have to go all the way pack. you can create the faces inside of fluent. have a look in the 'surface' menu. there you can create faces (2D) or planes (3D) anywhere in the domain. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cross Product in Vorticity Confinement | Kastenfrosch | Main CFD Forum | 6 | July 30, 2010 06:45 |
Creating surfaces with cooper cross sections | esinticik | FLUENT | 0 | January 26, 2010 02:30 |
Pressure drop between cross sections | Mauro | Main CFD Forum | 0 | September 13, 2007 02:09 |
Preconditioning and pressure contours | ganesh | Main CFD Forum | 2 | February 18, 2006 00:02 |
extension for liquid fraction contours | venugopal | FLUENT | 0 | June 11, 2004 01:27 |