Pipe flow simulation

flippy · February 19, 2013, 10:01

Quote:

Originally Posted by Far

it is 1.01 ^ 5 or 10.1 ^5 pa?

1.01 sorry, you posted before I finished editing

flippy · February 20, 2013, 17:09

Quote:

Originally Posted by flotus1

for the easiest setup, use pressure inlet/pressure outlet boundary conditions. Check that the pressure difference is actually small enough to ensure laminar flow.

This actually did the job. Thanks flotus1 !!!
Seems the problem is if I define inlet as "velocity-inlet", the velocity profile at inlet isn't that of a developed flow, and Poiseuille's law only affects developed flow so that's why I'm getting different results.

kid phantom · March 4, 2015, 03:15

Hello guys.I want to ask something.I am doing my final year project and using SolidWorks for my project.I do not know how to run a flow simulation and where do I start first.Thanks.

flotus1 · March 6, 2015, 03:23

With the tutorials?

March 4, 2015, 03:15	New Boy	#23
kid phantom New Member kid phantom Join Date: Mar 2015 Posts: 1 Rep Power: 0	Hello guys.I want to ask something.I am doing my final year project and using SolidWorks for my project.I do not know how to run a flow simulation and where do I start first.Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Periodic Pipe Flow LES	dvolkind	CFX	8	March 21, 2020 05:30
Blockage in pipe ( using solidwork flow simulation)	jchow	FloEFD, FloWorks & FloTHERM	1	January 16, 2012 16:03
About Turbulence Intensity (Pipe flow assimilated)	gRomK13	Main CFD Forum	1	July 10, 2009 03:11
FDTD Simulation of flow through tapered pipe	Jim	Main CFD Forum	3	December 25, 2006 10:56
Turbulence in a pipe flow	JM	Main CFD Forum	4	December 21, 2006 04:04

March 6, 2015, 03:23		#24
flotus1 Super Moderator Alex Join Date: Jun 2012 Location: Germany Posts: 3,399 Rep Power: 46	With the tutorials?