|
[Sponsors] |
Impinging Air Jet Cooling on Flat Plate(Please Help) :( |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 16, 2013, 17:00 |
Impinging Air Jet Cooling on Flat Plate(Please Help) :(
|
#1 |
New Member
Fırat
Join Date: Oct 2012
Posts: 2
Rep Power: 0 |
Hi everyone;
I'm doing a project which involved jet impingement on a flat surface for cooling I'm using Ansys Fluent 13. My Reynold number is about 46000 (8 mm nozzle diameter and 54 m/s jet velocity) H/D =4 I'm using K-w SST or K-epsilon turbulance model. Plate thickness is 4 mm i used coarse meshing to be sure that im at the right way(after that i'm going to make fine meshing) but i can't see the temperature distrubution right to go on.After 45 seconds with transient process the centre of plate's temperature is high and the corners are lower. But the velocity vectors seem fine. Please help me . This situation has driven me crazy for about one week. (i only want to investigate heat transfer from plate. So do i have to model nozzle? is it necessary? ) |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DNS for Impinging Jet on a Flat Plate | Chandra Shekhar | Main CFD Forum | 3 | January 18, 2010 05:03 |
air bubble is disappear increasing time using vof | xujjun | CFX | 9 | June 9, 2009 07:59 |
air jet impingment on a moving flat plate | blueman_esf62 | FLUENT | 0 | May 2, 2009 02:40 |
air jet impingment on a moving flat plate | blueman_esf62 | FLUENT | 1 | April 27, 2009 09:40 |
IMPINGING JET ........... HELP!!!!!!!! | Amir Omoumi | Main CFD Forum | 10 | August 30, 1999 22:11 |