UDF for Heat Flux

kishan kumar jaiswal · April 11, 2014, 05:16

Dear all,
I am trying to write udf for heat flux having the formula

Q = 0.304/y*y*y

but I am unable to do it. It always shows some error.

Can anyone write udf for heat flux.

y is the length. and Q is the heat flux acting on X-Y plane in Z direction.
Geometry is a cube with dimension 10*5*0.005 all are in meters.
Thanks.

Bionico · April 11, 2014, 10:08

Hello kishan,
is this a boundary condition? In this case I suggest reading Fluent UDF Manual about DEFINE_PROFILE.

Regards

kishan kumar jaiswal · April 12, 2014, 01:35

Dear Bionico,
Thanks for your reply. Yes Its a boundary condition. I am doing the same as u suggested in your reply. but I don't know where I am wrong.

Bionico · April 14, 2014, 02:01

Hello,
can you post your UDF, please?

Regards

kishan kumar jaiswal · April 21, 2014, 18:01

Dear friend,
There are some changes introduced in the formula, right now it is

Q(Y) = (0.304)/(deltaY + deltaY/2)^-3
Where deltaY = 50cm and
Y = 10m

Y is the length on Y-axis and X whixh is equal to 5m is length on X-axis.
Q is heat flux apply on the X-Y plane towards the Z direction.
Geometry is a cube with dimension 10*5*0.005 all are in meters.

If possible please help

Regards,
Kishan

April 11, 2014, 05:16	UDF for Heat Flux	#1
kishan kumar jaiswal New Member Kishan Kumar Jaiswal Join Date: Nov 2013 Posts: 4 Rep Power: 12	Dear all, I am trying to write udf for heat flux having the formula Q = 0.304/yyy but I am unable to do it. It always shows some error. Can anyone write udf for heat flux. y is the length. and Q is the heat flux acting on X-Y plane in Z direction. Geometry is a cube with dimension 1050.005 all are in meters. Thanks. Last edited by kishan kumar jaiswal; April 11, 2014 at 07:18.

April 11, 2014, 10:08		#2
Bionico Senior Member Flavio Join Date: Sep 2011 Location: Brescia, Italy Posts: 181 Rep Power: 15	Hello kishan, is this a boundary condition? In this case I suggest reading Fluent UDF Manual about DEFINE_PROFILE. Regards __________________ Bionico

April 14, 2014, 02:01		#4
Bionico Senior Member Flavio Join Date: Sep 2011 Location: Brescia, Italy Posts: 181 Rep Power: 15	Hello, can you post your UDF, please? Regards __________________ Bionico

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
uds flux - drift velocity - udf	johnwinter	Fluent UDF and Scheme Programming	3	November 25, 2017 04:07
UDF Mass flux computing	Carlo	FLUENT	6	November 23, 2014 21:59
UDF for heat flux applied during T seconds	nazeem	FLUENT	0	June 22, 2004 05:26
UDF for a heat flux applied during T second on a w	nazeem	FLUENT	0	June 12, 2004 10:28
udf for transient heat flux BC	isaac	FLUENT	1	June 3, 2004 16:29

April 12, 2014, 01:35		#3
kishan kumar jaiswal New Member Kishan Kumar Jaiswal Join Date: Nov 2013 Posts: 4 Rep Power: 12	Dear Bionico, Thanks for your reply. Yes Its a boundary condition. I am doing the same as u suggested in your reply. but I don't know where I am wrong.

April 21, 2014, 18:01		#5
kishan kumar jaiswal New Member Kishan Kumar Jaiswal Join Date: Nov 2013 Posts: 4 Rep Power: 12	Dear friend, There are some changes introduced in the formula, right now it is Q(Y) = (0.304)/(deltaY + deltaY/2)^-3 Where deltaY = 50cm and Y = 10m Y is the length on Y-axis and X whixh is equal to 5m is length on X-axis. Q is heat flux apply on the X-Y plane towards the Z direction. Geometry is a cube with dimension 1050.005 all are in meters. If possible please help Regards, Kishan