|
[Sponsors] |
component flow direction fieldnames for boundary profiles required. |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 12, 2000, 05:31 |
component flow direction fieldnames for boundary profiles required.
|
#1 |
Guest
Posts: n/a
|
Hello, again
I'm trying to specify a arbitrary swirl profile on a jet pipe inlet (boundary type Pressure_inlet). Using a direction vector specification method with a local cylindrical co-ordinate system, the fields of Radial, Tangential and axial flow direction only allow me to input constant values. I want to be able to vary the tangential component (swirl) with the radial distance. I assume the way to do this is to write a boundary profile for the pressure inlet. My question is what are the filenames I need to use to create profiles for these vector components. The only ones I can find are if I write profiles from fluent and look at the resulting profile file. The closest this gives are fieldnames for the component or relative component velocities! I only want the component flow directions. Thanks again p.s. Is there a complete list of all the fieldnames for which you can create profiles? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM] Problem with paraFoam on a linux-64 bit | bunni | ParaView | 4 | April 14, 2010 20:55 |
Inviscid Drag at subsonic, subcritical Mach # | Axel Rohde | Main CFD Forum | 1 | November 19, 2001 12:19 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 21:31 |
Flow visualization vs. Calculated flow patterns | Francisco Saldarriaga | Main CFD Forum | 1 | August 2, 1999 23:18 |
Question on 3D potential flow | Adrin Gharakhani | Main CFD Forum | 13 | June 21, 1999 05:18 |