CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Non-overlapping portion in non-conformal meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 22, 2000, 02:39
Default Non-overlapping portion in non-conformal meshing
  #1
Ramesh
Guest
 
Posts: n/a
Hi all

In my 3D simulation, Fluent is not allowing the flow across the non-overlapping portion of the interface that used for non-conformal meshing. What can I do overcome this situation?

Thanking you,

Remesh.
  Reply With Quote

Old   July 23, 2000, 03:34
Default Re: Non-overlapping portion in non-conformal meshi
  #2
Michael
Guest
 
Posts: n/a
It has changed the non overlapping portions to wall zones. That is why there is no fluid flow across that portion. When you create a new mesh you can spilt the wall zones at the point where the non-overlapping portion begins
  Reply With Quote

Old   July 24, 2000, 23:20
Default Re: Non-overlapping portion in non-conformal meshi
  #3
Ramesh
Guest
 
Posts: n/a
Hi Michael,

Is it true that the non-overlapped portion of the mesh has been transformed to wall? In that case, can i change the automatically generated wall to some other zone type so that the flow will not be affected?

Thanks, Ramesh.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
non conformal interface, meshing, inverted volume araghunath OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 1 April 7, 2011 04:27
Meshing locks workbench window. andy2o CFX 0 February 1, 2008 06:01
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 11:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 11:08
Is conformal meshing really an advantage? Alvin Szeto Main CFD Forum 19 June 27, 2003 07:23


All times are GMT -4. The time now is 02:00.