CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

For a correct the mole fraction ...

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 9, 2002, 04:39
Default For a correct the mole fraction ...
  #1
kevin
Guest
 
Posts: n/a
Hi~~~ Two inlet condition be exist in my model .. First gases flow through frist model (includes H2,CO) Mass fraction of H2 is 0.4 Mass fraction of H2O is 0.6 Second gases flow through second model (includes CO2,N2) Mass fraction of CO2 is 0.3 Mass fraction of N2 is 0.7 How to get a correct mole fraction from my model .. For a correct mole fraction , To must write a simple program calcuate mass fraction . Thanks a lot

Kevin
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
On the damBreak4phaseFine cases paean OpenFOAM Running, Solving & CFD 0 November 14, 2008 22:14
CFX Solver Memory Error mike CFX 1 March 19, 2008 08:22
Diffusion-coefficient based on mole fraction Fady FLUENT 1 November 11, 2006 10:00


All times are GMT -4. The time now is 19:27.