CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Tracking interface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 6, 2002, 04:21
Default Tracking interface
  #1
Rajeev Kumar Singh
Guest
 
Posts: n/a
Hi everybody out there !

I have been trying to see how a solid ball melts inside a liquid pool. Using phase change (solidification/melting model) as given in the example of phase change I have set up a 2D problem. The solid ball is 1 cm radius lying inside a 20 cm radius liquid pool. Bigger radius I am using as insulated wall. Melt I am patching at 700 deg C, ball at 300 deg C, solidus = liquidus = 660 Deg C. Now while I am using the unsteady solver I want to monitor the liquid solid interface. This will essentially be the point where liquid fraction changes from 0 to 1. Can anyone of you help me in writing a surface monitor or custom field function so that I can directly generate a graph of ball radius vs. time.

Thanks in advance,

Rajeev
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 34 October 16, 2014 05:27
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
what is Interface tracking? gholamghar Main CFD Forum 1 March 18, 2009 06:58
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 20:38.