|
[Sponsors] |
January 10, 2003, 15:18 |
gambit geometry
|
#1 |
Guest
Posts: n/a
|
Hi there please check the link below and solve the problem i am facing with making this complex geometry. regards.
http://bama.ua.edu/~dhand001/gambit.htm |
|
January 10, 2003, 20:46 |
Re: gambit geometry
|
#2 |
Guest
Posts: n/a
|
So far I got.... there is a problem creating the face.. the frustum in not face there it could be either volume or emty. If volume then u need to joint that two volumes to reach the face C, if emty then there is no connection (face) with the main volume, only line connetion exit that means no fluid flow..
Am I clear...? if not then tell me what is differnce..I hope i Can help u Alamgir |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[GAMBIT] how to mesh a 3d spiral geometry in gambit | seyedashraf | ANSYS Meshing & Geometry | 9 | July 4, 2013 05:42 |
create turbine geometry with gambit | badlaine | ANSYS Meshing & Geometry | 2 | March 26, 2012 23:54 |
[GAMBIT] meshing in GAMBIT, a flow through a pipe having complex inflow geometry | mazhar1613 | ANSYS Meshing & Geometry | 1 | January 11, 2012 23:18 |
What can I employ to create geometry besides Gambit? | summer | ANSYS Meshing & Geometry | 2 | February 11, 2011 14:50 |
problem about Importing geometry in Gambit | Hua Gu | FLUENT | 3 | April 2, 2002 14:24 |