CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Dynamic mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 7, 2004, 05:18
Default Dynamic mesh
  #1
tomm
Guest
 
Posts: n/a
Hi

I've some problems with dynamic mesh.I want to add dynamic mesh in process of laser welding of materials.I don't know how to write udf in this case.I want to obtain deformation of surface during laser welding of material.

Thanks for any help.
  Reply With Quote

Old   October 4, 2004, 08:06
Default Re: Dynamic mesh
  #2
kim
Guest
 
Posts: n/a
Actually, this is a quite tough task to complete. I am doing the similar dynamic remeshing during the simulation. The big problem is that some kind of negative volumes appear as iteration proceed. It seems that FLUENT is not good as such kind of problem for radom remeshing.
  Reply With Quote

Old   October 11, 2004, 05:54
Default Re: Dynamic mesh
  #3
ducvinh
Guest
 
Posts: n/a
When you got the negative volume detected, there's some ways that you can do to avoid it: 1. Reduce the minimum volume ( around 1e-13 is ok for 2D and 3D problem) 2. Reduce the maximum skewness to force FLUENT remesh at highly sknewnesss region. For 3D, i tried the maximum sknewness around 0.75 and it's quite ok. Regards Duc Vinh
  Reply With Quote

Old   October 12, 2004, 08:53
Default Re: Dynamic mesh
  #4
kim
Guest
 
Posts: n/a
thanks. I will try it. In my case, DEFIBE_GRTD_MOTION was used to describe the individual nodes movement on the boundary wall. The nodes were expected to move inwards the computing domain. However, the velocity movement of nodes is not same for the nodes which could cause the distortion of the cells. Have you had any experiences for sloving such problem?

I will appreciate it very much if you can give me some sugestions.

Regards,

Kim
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Incylinder dynamic mesh with volumetric reaction mas FLUENT 4 May 3, 2012 10:22
Dynamic Mesh on Pintle type injector. herntan FLUENT 15 January 4, 2012 03:31
pls help. mesh collapsed with dynamic mesh. wlt_1985 FLUENT 1 July 28, 2011 01:53
dynamic mesh on a hexa grid Manoj Kumar FLUENT 0 August 21, 2007 07:41
Dynamic mesh + grid adapt = Crash! (Files included BillH FLUENT 4 July 24, 2007 15:31


All times are GMT -4. The time now is 23:51.