|
[Sponsors] |
October 25, 2005, 06:48 |
Split volume with a face error
|
#1 |
Guest
Posts: n/a
|
Hi,
When i try and split a volume with a face i get the following error message 'Edge tangent to intersection curve but not to surface-Restoring the geomeric model to the state before the current operation' Does anyone know what this means and how i could get around it? I am banging my head against a brick wall. Many thanks for your advice Duncan |
|
October 25, 2005, 13:45 |
Re: Split volume with a face error
|
#2 |
Guest
Posts: n/a
|
first check if the face is real or virtual. then check what ur retaining and what part you're deleting. try n extend the face domain.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Building OpenFOAM1.7.0 from source | ata | OpenFOAM Installation | 46 | March 6, 2022 13:21 |
Version 15 on Mac OS X | gschaider | OpenFOAM Installation | 113 | December 2, 2009 10:23 |
POSDAT problem | piotka | STAR-CD | 4 | June 12, 2009 08:43 |
OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 19:08 |
user subroutine error | CFDUSER | CFX | 2 | December 9, 2006 06:31 |