CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Radiation in multiple cellular enclosure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 21, 2005, 06:05
Default Radiation in multiple cellular enclosure
  #1
Bert
Guest
 
Posts: n/a
Dear All, Anyone of you know to whether FLUENT 6 can model radiation within seperated multiple enclosures, experiencing buoyancy flows using the boussinesq model? I've tried modelling radiation in enclosures with only one cavity and it worked. it does not work for two or multiple cavity problems. However, I'm not to sure. please help. any suggestions and views will be greatly appreciatted. thank you.
  Reply With Quote

Old   November 21, 2005, 14:28
Default Re: Radiation in multiple cellular enclosure
  #2
Evan Rosenbaum
Guest
 
Posts: n/a
Should work, we've done it. I suspect your problem is not the rqadiation, but the buoyancy. Turn off radiation and see if it runs to confirm this. If it still doesn't run then consider using ideal gas, piecewise-linear or another variable density model for density.

If turning off radiation does eliminate the problem (and therefore is the problem), I know that we have used the DTRM and DO models successfully so consider using one of them if you aren't already.

  Reply With Quote

Old   November 21, 2005, 16:59
Default Re: Radiation in multiple cellular enclosure
  #3
Bert
Guest
 
Posts: n/a
Thanks for your reply. If it's not too much trouble, can you point me to any tutorials on this subject on radiation in multiple (unconnected) enclosures. I'm actually modelling a conjugate heat transfer problem involving a solid enclosure with multiple enclosures. in the encloures, the fluid is invoked for boussinesq approximation. hope to hear from you. thank you.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
natural convection problem with radiation jorien CFX 0 October 14, 2011 09:26
OpenFOAM static build on Cray XT5 asaijo OpenFOAM Installation 9 April 6, 2011 12:21
Multiphase radiation in CFX Luk_Fiz CFX 5 March 17, 2009 04:51
radiation of molton liquid metal in enclosure richard CFX 0 April 8, 2008 15:43


All times are GMT -4. The time now is 15:04.