CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

equiangle skew with tetrahedral cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 7, 2005, 06:03
Default equiangle skew with tetrahedral cells
  #1
Wouter
Guest
 
Posts: n/a
Hi, I am experiencing convergence issues with a cylinder like geometry in which a swirly flow occurs, so I need to use RSM turbulence modeling. The convergence issues seem to be associated with cells with an equiangleskew close to 0.8. The problems appear as small vortices in the flow that do not disappear.

However, with Gambit I find it hard to generate meshes with no cells with an equiangle skew around 0.8: even for a simple geometry such as a cylinder volumetric meshing (tet/hex, Tgrid method) many cells with higher skewness values occur. Probably this is not an issue for flows with simpler physics, but does anyone have an advice how to generate tet-meshes with small skewness value? Thanks

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 23 August 6, 2014 03:50
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
snappyHexMesh aborting Tobi OpenFOAM Native Meshers: snappyHexMesh and Others 0 November 10, 2010 04:23
physical boundary error!! kris CD-adapco 2 August 3, 2005 00:32


All times are GMT -4. The time now is 22:04.