|
[Sponsors] |
mass transfer through wall by passive diffusion |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 6, 2006, 05:11 |
mass transfer through wall by passive diffusion
|
#1 |
Guest
Posts: n/a
|
my problem: 1. how to define a thickness of a solid wall.(the geometry includs only the face of the wall).
2.how to define boundry conditions in both sides of the wall,and mass fractions. 3. where to define diffusion constants for the wall. thank you! hagar |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
natural convection | mehrdadeng | CFX | 10 | February 25, 2011 05:25 |
How to calculate Volumetric Mass transfer coefficient using CFX? | tuks_123 | CFX | 2 | July 22, 2010 01:15 |
k-e Model-BC for Mass transfer from wet duct wall | R.Sureshkumar | Main CFD Forum | 0 | June 24, 1999 16:02 |
BC-For Mass Transfer From Wet Duct Wall | R.Sureshkumar | Main CFD Forum | 0 | June 22, 1999 08:27 |