CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

FLUENT Warning

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 21, 2006, 05:41
Default FLUENT Warning
  #1
Jordi
Guest
 
Posts: n/a
Hi, everybody! I have a problem with an error in FLUENT. When a put my T-Grid-Mesh in Fluent, this report to me this messages:

Building ...

grid,

Note: Separating wall zone 192 into zones 192 and 1.

top_wings -> top_wings (192 and top_wings:001 (1) Note: Separating wall zone 197 into zones 197 and 2.

top_wings -> wing_laterals (197 and wing_laterals:002 (2) Note: Separating wall zone 200 into zones 200 and 3.

top_wings -> bottom_last_wings (200) and bottom_last_wings:003 (3)

Warning: Number of nodes read (1760652) does not match number referenced (1750267). Resetting counter to match the number referenced.

I don't know why FLUENT separate the feces in two parts and one of those is named *****:001 for example. If somebody can help me with that, I'll apreciate it. THANKS

CONGRATULATIONS all of you for the great web and everybody who helps the lost guys like me.

THANKS A LOT

BYE

JORDI
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to use setField to create sphere sega OpenFOAM Pre-Processing 38 January 13, 2022 01:39
Cells with t below lower limit Purushothama Siemens 2 May 31, 2010 22:58
latest OpenFOAM-1.6.x from git failed to compile phsieh2005 OpenFOAM Bugs 25 February 9, 2010 05:37
[OpenFOAM] Paraview command not found hardy ParaView 7 September 18, 2008 05:59
OpenFOAM14 for Mac OSX Darwin 104 gschaider OpenFOAM Installation 118 July 20, 2008 06:19


All times are GMT -4. The time now is 07:51.