CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

undesired interior to wall boundary types

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 10, 2006, 08:36
Default undesired interior to wall boundary types
  #1
T Chin
Guest
 
Posts: n/a
Hi, i've created a 3D model of an artificial artery in Gambit 2.2.30 and need to run simulations in Fluent 6.2.16.

I've modelled a small section of the artery, which i want to copy repeatedly in order to create the entire length. However, when i copy the volumes to add to the overall length, gambit/fluent changes what are interior boundaries on the original model into Walls in the Copied section.

Does anyone know what might be causing this, and how i can avoid it? i've been trying to work it out for days without any success.

Any help would be very much appreciated. regards,

Tristan
  Reply With Quote

Old   May 10, 2006, 08:49
Default Re: undesired interior to wall boundary types
  #2
Jason
Guest
 
Posts: n/a
I don't think you can when copying volumes. I know when doing a move there's a "connected geometry" option in the bottom of the command window that will keep everything connected moving together. I don't know if it's there when you are performing a copy though.

You can reconnect the faces. If the geometry is real, then it's easy. In the faces menu, select the connect command (looks like a black plug). You can select all of the geometry at once and select real connect. Then Gambit will automatically connect any face pairs that are within tolerance. If the geometry's virtual, then you have to connect each face pair by selecting the two faces and the virtual connect option.

Hope this helps, and good luck, Jason
  Reply With Quote

Old   May 10, 2006, 11:39
Default Re: undesired interior to wall boundary types
  #3
T Chin
Guest
 
Posts: n/a
Thanks Jason, reconnecting the faces seems to have gotten rid of my problem...i hadn`t realised that all the faces become disconnected during a copy command -another useful thing to know i guess.

anyway thanks a lot, you probably saved me another couple of days of stress.

regards, Tristan
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wall boundary condition (a very simple question) safa_c FLUENT 1 August 15, 2010 05:05
External Radiation Boundary Condition (Two sided wall), Grid Interface CFD XUE FLUENT 0 July 8, 2010 06:49
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug unoder OpenFOAM Installation 11 January 30, 2008 21:30
Deal with wall boundary with moving mesh by FVM? aiya Main CFD Forum 6 May 10, 2007 11:33
Water vapour condensation in CFX-5.7.1 hdj CFX 1 November 27, 2005 08:15


All times are GMT -4. The time now is 23:08.