CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Two Questions about FLUENT Skills

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 3, 2006, 04:16
Default Two Questions about FLUENT Skills
  #1
Mr.Kim
Guest
 
Posts: n/a
I'm a undergraduate student studying Fluent tutorial now. If you could give me a little help, it would be very grateful to me. ^^

There is a hexahedron chamber. It has three holes, two is small and one is larger. With these holes, make the chamber to be vacuummed.

From atmospheric pressure to 5Pa, use two small holes, and to vacuum, use a larger hole.

๋ฌธ์ œ๋Š", 5Pa ๊นŒ์ง€๋Š" ์ž'์€ ๊ตฌ๋ฉ ๋งŒ์„ ์‚ฌ์šฉํ•˜์-ฌ ๊ธฐ์ฒด๋ฅผ ๋ฝ'์•„๋‚ด๊ณ , The problem here, if the pressure leads to 5Pa, FLUENT has to be stopped at that point, and switch the condition(from small holes to larger one) it should be reIterationed.

So, I made every effort to find that menu in FLUENT, but I could not find any.

Is Everyone know about that?

It would be very thank you ... ๊ทธ ๋‹ค์Œ๋ถ€ํ„ฐ๋Š" ํฐ ๊ตฌ๋ฉ ๋งŒ์„ ์‚ฌ์šฉํ•˜์-ฌ ์ง„๊ณต์- ์ด๋ฅด๊ฒŒ ํ• ๊ฒƒ์ธ๋ฐ์š"~

FLUENT ๋ฉ"๋‰ด ์ค'์-์„œ, ์ผ์ • ์••๋ ฅ(์-ฌ๊ธฐ์„œ๋Š" 5Pa)๊นŒ์ง€ ๋‹ค๋‹ค๋ž์„ ๋•Œ, Stopํ•˜๋Š" ๊ฒƒ์ด

์–ด๋–ค ๊ฒƒ์ด ์žˆ์„๊นŒ...ํ•˜๋Š" ๊ฒƒ์ž…๋‹ˆ๋‹ค.

5Pa์-์„œ ์Šคํƒ' ํ•œ ๋‹ค์Œ, ํฐ ๊ตฌ๋ฉ์œผ๋กœ ์กฐ๊ฑด์„ ๋ฐ"๊ฟ"์„œ Iteration ํ•ด ์ฃผ์–ด์•ผ ํ•˜๊ฑฐ๋" ์š"~

์„ ๋ฐฐ๋‹˜๋"ค... ์กฐ์–ธ ๋ถ€ํƒ๋"œ๋ฆฝ๋‹ˆ๋‹ค. ^-------^

์•„์ฐธ~ ํ•œ ๊ฐ€์ง€ ๋" ์-ฌ์*™๊ณ ์ž...

์ฒด์ ์„ ์•Œ๊ณ ์žˆ๋Š" ๋Œ€๊ธฐ์••์˜ Chamber๋‚ด์˜ ์œ ๋Ÿ‰ ๊ตฌํ•˜๋Š" ๋ฐฉ๋ฒ• ์ข€... ^^;;

  Reply With Quote

Old   August 3, 2006, 04:22
Default Re: Two Questions about FLUENT Skills
  #2
Mr.Kim
Guest
 
Posts: n/a
I'm an undergraduate student studying Fluent tutorial now. If you could give me a little help, it would be very grateful to me. ^^

There is a hexahedron chamber. It has three holes, two is small and one is larger. With these holes, make the chamber to be vacuummed.

From atmospheric pressure to 5Pa, use two small holes, and to vacuum, use a larger hole.

The problem here, if the pressure leads to 5Pa, FLUENT has to be stopped at that point, and switch the condition(from small holes to larger one) it should be reIterationed.

So, I made every effort to find that function in FLUENT, but I could not find any.

Is Everyone know about that?

It would be very thank you ...

The other one is...

The way(or equation) to measure a flux of the already known size of hexahedron.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent3DMeshToFoam simvun OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 48 May 14, 2012 05:20
What the differences flow equation of Fluent 6.3 and Fluent 12.1 opehterinar81 FLUENT 0 August 19, 2011 11:55
Fluent jobs through pbs ibnkureshi FLUENT 5 June 9, 2011 13:43
CFD beginner:- Help needed, general questions on Free jets? (Fluent 5.2.3) Wong, R.Y.T. Main CFD Forum 5 October 22, 2010 00:51
solving ocean wave with Fluent or CFX? gholamghar Main CFD Forum 1 March 21, 2009 13:49


All times are GMT -4. The time now is 15:37.