CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Problem in Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 5, 2006, 05:27
Default Problem in Gambit
  #1
Francisco
Guest
 
Posts: n/a
Hello Everybody

I'm realy do not get it why gambit can't connect tow volums with different mesh size. I know now that I can connect them in Fluent as interfaces, but in connsequence I will have to connect 100's of interfaces because I copy the basic geometry a few times.

Does anyone have an idea how to connect the volumes in another way in Gambit itself, so I do not have to work on interfaces in Fluent.

Thank you

Regards

Francisco
  Reply With Quote

Old   September 5, 2006, 07:46
Default Re: Problem in Gambit
  #2
Jason
Guest
 
Posts: n/a
You can't. Non-conformal interfaces are defined within Fluent.

If you have multiple cases, you may be able to setup the first one, and then file/write-bc and then file/read-bc for the new one and that MAY set the interfaces for you.

Another option would be writing a journal that sets up the interfaces for you, but I don't know what the syntax would be for that. You could record what you're doing and then try copying that for the other interfaces. You'll have to look up how to reference face names in a journal, or you'll have to figure out what all of the face IDs are.

Good luck, Jason
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit geometry problem cestrin FLUENT 3 July 4, 2012 02:33
Problem with Mesh conversion Gambit msh Foam Rachid BANNARI (Bannari) OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 25 September 11, 2011 07:58
Gambit installation problem Panos FLUENT 4 March 5, 2009 23:44
Problem meshing with Gambit Adrian FLUENT 8 October 7, 2008 08:39
Startup Problem in Gambit 2.2 with WindowXP Win Win Maw FLUENT 3 January 25, 2006 12:09


All times are GMT -4. The time now is 14:47.