CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

von karman issue

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 14, 2006, 15:54
Default von karman issue
  #1
Rafal Zamorowski
Guest
 
Posts: n/a
I am trying to simulate von karman street over square cylinder. I am trying diffrent models of k=e with enhanced wall treatment. y+ of wall is less then 1. dimension of vortex generator (square cylinder)is 1 cm. Width of channel is 10 cm lenght is 30 cm (2D). from strouhal number formula time step is 0.0004 for velocity 5m/s. fluid is water. Boundary is velo inlet, on side walls of channel is symetry , outflow. Intensity of turb in initial boundary condition is 10 percent, lenght scale of vortex is 0,1m. All i got from this calculations is straight (like higway) wake behind cylider without any detaching vortices. I tried also to force fluent to detach vortices (to shear or cut the wake) by patching (perpedicular to mean flow) velocity behind cylider. I ve been working with this for loooong time (with different velo, and meshes, also with circular cylinder)but i cannot find what is wrong
  Reply With Quote

Old   January 1, 2007, 13:45
Default Re: von karman issue
  #2
khairy
Guest
 
Posts: n/a
Hi,

1- use dimensionless time 0.005 in your case try dt =1e-6 seconds 2- use unsteady solver 3- u may need increase the side distance to 15 cm 4- are u scale this grid in gambit 5- use tri grid without patching or patch with structured grid ,as the non symmetry in triangle grid cause the required patching 6- use low re k-e for y+ <1

i hope this useful Khairy -Egypt
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wmake compiling Problem with OF1.5 openTom OpenFOAM Installation 4 May 3, 2009 14:44
von karman constant sebastien FLUENT 0 July 19, 2006 16:25
Von Karman Vortex Rodrigo Madariaga Main CFD Forum 0 December 13, 2002 17:12
Vortexes shedding (von karman vortexes) Mahdy Karzar Jeddy FLUENT 1 August 11, 2002 22:25
Von Karman Integral Length Scale Txingurri Main CFD Forum 0 May 2, 2002 12:05


All times are GMT -4. The time now is 01:58.