CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Coal water mixture

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 4, 2007, 06:46
Default Coal water mixture
  #1
Alex
Guest
 
Posts: n/a
Hello, I have a problem about simulation coal gasification... I use pulvurized coal 40 and 50 micron,that contain 58% coal and 42% water that formed slurry. How to model it?? Thanks
  Reply With Quote

Old   March 6, 2007, 23:30
Default Re: Coal water mixture
  #2
Prabhat
Guest
 
Posts: n/a
You can use species transport model. Use water as one inlet and air as secondary inlet. You can also use non-premix combustion with two mixture fraction approach.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Mixture of water and oil in the centrifugal separator teck0516 Main CFD Forum 0 July 21, 2011 00:56
How to set 2 phases in Fluent: Mixture & Water JW FLUENT 7 May 26, 2006 10:10
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 09:11
uptodate water distribution network fredius,magige,tanzanian,(e.a) Main CFD Forum 0 January 27, 2002 08:10


All times are GMT -4. The time now is 10:06.