|
[Sponsors] |
March 19, 2007, 23:02 |
U Tube Face linking.
|
#1 |
Guest
Posts: n/a
|
Hi, am encountering a problem while meshing for a U tube. I first link the opposite ends of the U Tube. And when I create mesh for one face the other face should also be meshed with a copy of first face 'meshing'...contrary to that the 2nd face meshing is degraded. Please help.
thanks!!! |
|
March 20, 2007, 05:12 |
Re: U Tube Face linking.
|
#2 |
Guest
Posts: n/a
|
I generated this request, and later on found the solution so am posting it.
1. The mistake I was making while linking the faces is I was not correctly selecting the vertices. 2. One has to be carefull while selecting the vertices (Corresponing veritces must be selected) 3. The direction of the meshing faces should be opposite (a mendtory condition). |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 05:50 |
[blockMesh] BlockMeshmergePatchPairs | hjasak | OpenFOAM Meshing & Mesh Conversion | 11 | August 15, 2008 07:36 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
[blockMesh] Axisymmetrical mesh | Rasmus Gjesing (Gjesing) | OpenFOAM Meshing & Mesh Conversion | 10 | April 2, 2007 14:00 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |