CFD Online Logo CFD Online URL
Home > Forums > FLUENT

simulation of non-newtonian flow

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 9, 2007, 11:40
Default simulation of non-newtonian flow
Posts: n/a
I am a student at institute in Surabaya,Indonesia.Now I am finishing my final project about flow of mud in Sidoarjo. I must make a simulation of non newtonian flow because I use high concentration mud about 50% volume. I must know the characteristic of mud,so I must count the pressure and velocity flow of mud in pipe. My friend sad that is very difficult,so I don't know where I can ask again. Could you help me to make model the flow of mud in horizontal pipe?it is very important because the volume of mud is over 10,000,000 litre and maybe you have watched from television. Our government must remove mud to the Sea by pipe and I must to simulate it with fluent,to get the optimum design of pipelines. Sory, if my English in not good so I hope you can understand. Thank very much, sir. I wait your answer.
  Reply With Quote

Old   August 9, 2007, 12:53
Default Re: simulation of non-newtonian flow
Posts: n/a
Start with a 1D ODE based model.
  Reply With Quote

Old   August 14, 2007, 11:24
Default Re: simulation of non-newtonian flow
Posts: n/a
Excuse me,Sir. Do you know about mud vulcano flow in Sidoarjo, Indonesia?My city could face flooding within the next two years if nothing was done to reduce the sedimentation of mud. Do you have the property of mud, sir?for example: particle diameter, viscosity (non-newtonian) and density of mud. I am very need it to simulate the flow of mud with fluent in horisontal pipelines so I can predict the flow characteristic before we do it in real pipe. Please tell me about it. Thank for your answer
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Channel flow setup in Large-eddy simulation Weihua Main CFD Forum 6 November 17, 2015 10:33
Is there any software for hypersonic flow simulation? atmcfd Main CFD Forum 3 November 29, 2010 00:28
Multiphase flow - simulation crashing yschati CFX 14 November 16, 2010 18:29
Expert parameter to stop the fluid flow simulation KK CFX 1 February 25, 2008 17:29
About unsteady flow simulation Ji NUMECA 3 June 10, 2003 10:04

All times are GMT -4. The time now is 19:24.