CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

modelling udf-sourceterm for transitional flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 12, 2007, 13:46
Default modelling udf-sourceterm for transitional flow
  #1
matthias
Guest
 
Posts: n/a
hi, i simulate a 2d transitional flow over an airfoil. since the flow is laminar at the beginning and turbulent at the end, i have to divide the area into a laminar and a turbulent zone. until now i did it by dividing the mesh into two zones. but this very costly because i have to design a new grid for every angle of atttack (the point of transition moves). there should be a possibility to simulate the transition with a udf source term. but i dont know how to do that. is there anybody, who has done that before and could help me(e.g. by sending me a example source-file)? thanks in advance
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF for coal combustion in multiphase flow niisha24 Fluent UDF and Scheme Programming 10 March 9, 2015 02:56
Basic UDF for unsteady mass flow rate emmkell Fluent UDF and Scheme Programming 2 September 9, 2013 04:48
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
ask help on valve flow simulation(3D modelling) Anna FLUENT 0 July 18, 2003 17:39
UDF for pulsing flow. J. Keays FLUENT 0 February 1, 2001 11:19


All times are GMT -4. The time now is 14:07.