Quick reading Boundary conditions

sunilpatil · December 21, 2018, 07:27

Hi All,
I am solving conjugate heat transfer problem where my mesh count is around 30 million. I am having different cases with slight change in mesh. If I want to apply same boundary conditions for all the cases currently I am using
file/read/name.bc command but it is taking more than 4 hours to execute.

Please suggest me any quick way to assign saved boundary conditions to different case file.

(replace mesh is also taking longer time)

Regards,
Sunil

LuckyTran · December 21, 2018, 11:05

You're overthinking it. Use the modify/boundary-conditions to assign them to each case

sunilpatil · January 1, 2019, 05:00

Hi LuckyTran,
Yes you are right, but with the present method it is taking longer time so I started searching an alternative.

Regards,
Suneel

LuckyTran · January 1, 2019, 11:35

All the settings are stored in the .cas file, which if saved in ascii format is a giant text file. Opening each and every .cas file with a 30 million cell mesh will take time...

December 21, 2018, 07:27	Quick reading Boundary conditions	#1
sunilpatil Senior Member sunil Join Date: Jul 2012 Location: Bangalore Posts: 179 Rep Power: 13	Hi All, I am solving conjugate heat transfer problem where my mesh count is around 30 million. I am having different cases with slight change in mesh. If I want to apply same boundary conditions for all the cases currently I am using file/read/name.bc command but it is taking more than 4 hours to execute. Please suggest me any quick way to assign saved boundary conditions to different case file. (replace mesh is also taking longer time) Regards, Sunil __________________ Regards, Sunil

December 21, 2018, 11:05		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,675 Rep Power: 66	You're overthinking it. Use the modify/boundary-conditions to assign them to each case racing_student likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiphase flow - incorrect velocity on inlet	Mike_Tom	CFX	6	September 29, 2016 01:27
Error - Solar absorber - Solar Thermal Radiation	MichaelK	CFX	12	September 1, 2016 05:15
Wrong flow in ratating domain problem	Sanyo	CFX	17	August 15, 2015 06:20
Problem with SIMPLEC-like finite volume channel flow boundary conditions	ghobold	Main CFD Forum	3	June 15, 2015 11:14
Error finding variable "THERMX"	sunilpatil	CFX	8	April 26, 2013 07:00

January 1, 2019, 05:00		#3
sunilpatil Senior Member sunil Join Date: Jul 2012 Location: Bangalore Posts: 179 Rep Power: 13	Hi LuckyTran, Yes you are right, but with the present method it is taking longer time so I started searching an alternative. Regards, Suneel

January 1, 2019, 11:35		#4
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,675 Rep Power: 66	All the settings are stored in the .cas file, which if saved in ascii format is a giant text file. Opening each and every .cas file with a 30 million cell mesh will take time...