CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Gas Solid Fluidization

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 20, 2009, 18:00
Post Gas Solid Fluidization
  #1
New Member
 
ANKW
Join Date: Nov 2009
Posts: 4
Rep Power: 7
ANKW is on a distinguished road
Dear, can someone tell about the drag model for cfd simulations of gas solid fluidization process using 1mm particles. In fluent there are three options: Gidaspow, Syanlal Obrien and Wen & Yu. Have someone tried these models for bigger partilces (like 1-2 mm). Which predicted the experiemtnal results well?
Can soemone tell about the significance of Granular temperature models. I mean in Fluent there are two options 1) Phase Property and 2) Partial Differential Equation. Which is best to use in case of gas solid fluidization of 1mm particles in the range of 1.1 to 1.55 Umf gas superficial velocity
If it si PDE then there are different models available in fluent, like Syamlala, Gidaspow etc. Which can be more appropriate in case of 1m particles. The information about the models is also required in case of Granular Viscoity and Bulk Viscosity

Thank for reading and reply
ANKW is offline   Reply With Quote

Old   November 21, 2009, 11:13
Default gas solid fluidization
  #2
New Member
 
Achyut Takalkar
Join Date: Nov 2009
Location: Roorkee
Posts: 17
Rep Power: 7
achy7pch is on a distinguished road
hi i too working on gas solid fluidization. will u please send me the tutorials or materials that u have used for fluent operation. i am right now new to CFD. i
am studying at IIT Roorkee.my email id is takalkar_achyut@yahoo.com. i have already prepared mesh diagram for gas solid fluidized bed. but need help in fluent. please send me

if you do that i will be thankful to u.
achy7pch is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
Dispersed Solid particles in carrier gas (DPM) Frederik FLUENT 1 June 3, 2008 05:13
Gas pressure question Dan Moskal Main CFD Forum 0 October 24, 2002 22:02
gas solid flow in a pipe Pandu CFX 0 July 30, 2001 16:53
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 19:36.