|August 2, 2010, 13:37||
Aeroacoustic simulation with considering the solid domain
Join Date: Mar 2009
Posts: 120Rep Power: 8
Dear FLUENT Users,
I would like to ask with regard to an aeroacoustic simulation. I investigate the flow field of a complicated metal part. Based on the measurements this part is very noisy because of the high speed regions which can develop in the narrow cross sections. (The pressure expands from 10 bar to 2 bar in this unit.) The measurement-points were placed at the outside of this part.
Of course in the reality there is a 5mm thick aluminium wall between the flow field and the measurement-points which should be considered in the simulation as solid domain.
So my question: Can I carry out an aeroacoustic simulation where outside points are investigated with considering the wall thickness?
Thanks in advance
|Thread||Thread Starter||Forum||Replies||Last Post|
|increasing mesh quality is leading to poor convergence||tippo||CFX||2||May 5, 2009 10:55|
|heat conducting in a solid domain||Rogerio Fernandes Brito||NUMECA||0||March 18, 2008 18:24|
|heat conducting in a solid domain||Rogerio Fernandes Brito||CFX||0||March 18, 2008 18:20|
|Howto Sphere solid as a subdomain inside a domain?||jakjak||CFX||0||October 24, 2007 23:31|
|UDFs for Scalar Eqn - Fluid/Solid HT||Greg Perkins||FLUENT||0||October 11, 2000 03:43|