CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

A question on "Specifying Boundary Layer Deformation Smoothing"

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 23, 2011, 11:56
Question A question on "Specifying Boundary Layer Deformation Smoothing"
  #1
Member
 
Felix
Join Date: Mar 2011
Posts: 50
Rep Power: 14
didiean is on a distinguished road
Hi, everyone!
I am trying to use dynamic mesh of Fluent 6.3, but I meet with some problems when reading the Fluent 6.3 Help document.
It's about "Specifying Boundary Layer Deformation Smoothing" on Page 11-69 of Chapter 11.7. It describes the steps to define a moving and deforming boundary layer as flows:
"1. Select the moving and deforming zone in the Zone Names drop-down list.
2. Select the User-Defi ned option under Type.
3. In the Motion Attributes tab, select the user-defi ned function that defi nes the geometry and motion of the zone from the Mesh Motion UDF drop-down list.
4. Click Create.
5. Create a deforming dynamic zone for the boundary layer fluid zone by selecting the zone in the Zone Names drop-down list. Note that the boundary layer has to be a separate fluid zone from the adjacent fluid zone. Select Deforming under Type and enable Smoothing on the boundary layer fluid zone.
6. Click Create.
7. Create a deforming dynamic zone for the fluid zone outside the boundary layer by selecting the appropriate zone from the Zone Names drop-down list. Select Deforming under Type and enable Smoothing and Remeshing Methods on the fluid zone. Enabling both methods is necessary because the deforming boundary layer will deform the adjacent cells.
8. Click Create."

It seems to me that the 1st and 7th step have two different operations on the same zone. And the results of the 1st step will be altered by the 7th step. How can this happen?

In addition, can this operation be used for any deformed wall with boundary layers? For example, a beam with one end fixed moves in the way y=x^2*sin(2*t).
Hope I have described my question clearly. Thanks for your attention!
didiean is offline   Reply With Quote

Old   January 16, 2012, 20:20
Default Boundary Layer does not deform
  #2
New Member
 
ST
Join Date: Sep 2010
Posts: 9
Rep Power: 15
bbhv is on a distinguished road
Hi didiean,

I also have a doubt regarding this procedure.
I mesh my boundary layer with prism cells and then meshed the rest of the domain with tetrahedral cells.
The boundary layer and the remaining domain is not separated. There is only one interior zone in the model.
The wing and the boundary layer moves, but the tetrahedral cells do not, so it always hits negative volume at the 1st or 2nd time-step.
Any hints will be greatly appreciated.

Regards,
bbhv
bbhv is offline   Reply With Quote

Old   January 16, 2012, 22:39
Default
  #3
Member
 
Felix
Join Date: Mar 2011
Posts: 50
Rep Power: 14
didiean is on a distinguished road
Hi, bbhv.
Maybe you could use spring and remesh for the out tetrahedral cells.
didiean is offline   Reply With Quote

Reply

Tags
boundary layer, dynamic mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
CREATION OF BOUNDARY LAYER Jibran Haider FLUENT 3 August 1, 2008 01:33
can fluent capture BOUNDARY LAYER of POROUS zone? Alex FLUENT 0 April 22, 2006 08:14
Adding layer to cyclic boundary Chris P Siemens 3 November 15, 2004 22:17
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 06:10.