CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

thermal condition for combustor wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 16, 2013, 21:08
Default thermal condition for combustor wall
  #1
New Member
 
omar
Join Date: Feb 2013
Posts: 9
Rep Power: 4
MARIO276 is on a distinguished road
I want to make simulation by fluent 6.3 for cubic combustor 9*16*16 cm3 .
I choose mixed thermal condition, but i don't know how calculate the heat transfer coefficient, and heat generation rate, and what does "free stream temperature" mean ?

details about the used fuel in combustor it is syn gas produced from gasification
the mass of species that inter to comb. is 0.012183514 kg/s, and
Cp=1.2648 kj/kg.k, inlet syn gas temp =668k,
MARIO276 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
thermal condition for an interface wall takin FLUENT 2 September 1, 2009 10:36
thermal boundaries condition Antonin OpenFOAM Pre-Processing 0 May 14, 2009 06:34
CFX Solver : Sudden crash Hervé CFX 2 June 16, 2008 06:40
defining thermal boundary condition??? REZA FLUENT 1 February 15, 2006 22:13
Info: Short Course On Thermal Design of Electronic Equipment Arnold Free Main CFD Forum 0 August 10, 1999 10:18


All times are GMT -4. The time now is 14:23.