|
[Sponsors] |
September 3, 2001, 15:22 |
Resolution of a 2-equ. turbulence model
|
#1 |
Guest
Posts: n/a
|
Hi there,
I am currently writing a compressible Navier-Stokes code, essentially to solve turbomachinery problem. A FVM coupled with a Lax-wendroff scheme is used, so that this is an explicit scheme. I would like to incorporate the K-w model into the code. Meanwhile, I heard that it should be preferable, to solve the K-w equations (or any kind of turbulent transport equations), to use an implicit method.. Do you have any advice on that ? Thanks, André. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Use of k-epsilon and k-omega Models | Jade M | Main CFD Forum | 40 | January 27, 2023 08:18 |
Adding a Turbulence Model | doug | OpenFOAM Running, Solving & CFD | 11 | May 21, 2018 14:54 |
SimpleFoam case with SpalartAllmaras turbulence model implemented | nedved | OpenFOAM Running, Solving & CFD | 2 | November 30, 2014 23:43 |
KOmega Turbulence model from wwwopenFOAMWikinet | philippose | OpenFOAM Running, Solving & CFD | 30 | August 4, 2010 11:26 |
SSG Reynolds Turbulence Model | Georges | CFX | 1 | February 28, 2007 17:15 |