CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

spline in gmsh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 16, 2013, 02:05
Default spline in gmsh
  #1
Senior Member
 
Join Date: Jan 2013
Posts: 134
Rep Power: 13
kkpal is on a distinguished road
can some one please tell me what is the equation for spline in gmsh.
I used spline to create a line joining several points, but when i do the same in matlab using spline, the two lines are obviously different.s
kkpal is offline   Reply With Quote

Reply

Tags
equation, gmsh, spline

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Cgns support for gmsh robyTKD OpenFOAM Meshing & Mesh Conversion 1 July 13, 2016 12:27
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
[Gmsh] gmshToFoam problem: not the same mesh in Gmsh vs. paraview zhernadi OpenFOAM Meshing & Mesh Conversion 8 July 7, 2011 03:28
[Gmsh] Import problem ARC OpenFOAM Meshing & Mesh Conversion 0 February 27, 2010 11:56
[Gmsh] How does Gmsh deal with overlap boundaries? yuhai OpenFOAM Meshing & Mesh Conversion 1 April 24, 2009 14:34


All times are GMT -4. The time now is 03:00.