CFD Online Logo CFD Online URL
Home > Forums > NUMECA

Laminar boundary separation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 7, 2003, 22:31
Default Laminar boundary separation
Posts: n/a
I am studying laminar boundary separation on a low Reynolds number and low aspect ratio wing. At high angle of attack (>15 degree), the separation occurs.

With unsteady simulation, I observe a secondary bubble which disappears after some time.

I need some advices and read some related papers in this area.

  Reply With Quote

Old   March 16, 2003, 13:29
Default Re: Laminar boundary separation
Peter Attar
Posts: n/a
Look for papers on delta wings and leading edge separation...these experience secondary separation along with the primary leading edge separation.
  Reply With Quote

Old   March 26, 2003, 17:04
Default Re: Laminar boundary separation
Allan D. Grosvenor
Posts: n/a
Hi Yongsheng,

You can search and download useful papers from NASA's technical report servers at:

or try:

Good luck with your studies! Allan
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Laminar bubble separation Gilles CFX 1 July 24, 2008 21:57
Laminar Separation Adam CFX 2 April 14, 2005 06:33
Laminar separation bubble Axilleas Tsompanos FLUENT 5 August 6, 2004 12:24
V2F model and laminar separation Romuald Main CFD Forum 1 February 17, 2003 05:05
laminar separation on hydrofoils GŁnther Migeotte Main CFD Forum 9 August 4, 2000 09:04

All times are GMT -4. The time now is 14:17.