|
[Sponsors] |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
I am studying laminar boundary separation on a low Reynolds number and low aspect ratio wing. At high angle of attack (>15 degree), the separation occurs.
With unsteady simulation, I observe a secondary bubble which disappears after some time. I need some advices and read some related papers in this area. Thanks! |
|
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
Look for papers on delta wings and leading edge separation...these experience secondary separation along with the primary leading edge separation.
|
|
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
Hi Yongsheng,
You can search and download useful papers from NASA's technical report servers at: www.sti.nasa.gov or try: http://techreports.larc.nasa.gov/cgi-bin/NTRS Good luck with your studies! Allan |
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Laminar bubble separation | Gilles | CFX | 1 | July 24, 2008 21:57 |
Laminar Separation | Adam | CFX | 2 | April 14, 2005 06:33 |
Laminar separation bubble | Axilleas Tsompanos | FLUENT | 5 | August 6, 2004 12:24 |
V2F model and laminar separation | Romuald | Main CFD Forum | 1 | February 17, 2003 04:05 |
laminar separation on hydrofoils | Günther Migeotte | Main CFD Forum | 9 | August 4, 2000 09:04 |