|
[Sponsors] |
February 7, 2013, 03:43 |
istallation openFoam-1.6-ext problem
|
#1 |
Member
Arjang Behnoud
Join Date: Oct 2012
Posts: 61
Rep Power: 13 |
hi everyone
i'm new in openfoam,i've installed of211 on ubuntu12.04 and now i want to install openfoam-1.6-ext when i type (sudo git clone git://openfoam-extend.git.sourceforge.net/gitroot/openfoam-extend/openfoam-extend OpenFOAM-1.6-ext ) to download the source, terminal displays: fatal: The remote end hung up unexpectedly what should i do ? please guide me thanks Last edited by AmirBaqa1987; February 7, 2013 at 04:00. |
|
February 7, 2013, 04:39 |
|
#2 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
The official repository is down. For more information: http://www.cfd-online.com/Forums/ope...y-offline.html
You can download from an unofficial mirror: Code:
git clone https://github.com/ogoe/OpenFOAM-1.6-ext.git
__________________
|
|
February 7, 2013, 17:54 |
appreciate
|
#3 |
Member
Arjang Behnoud
Join Date: Oct 2012
Posts: 61
Rep Power: 13 |
thanks a lot bruno for your answers.
i used git clone https://github.com/ogoe/OpenFOAM-1.6-ext.git for downloading the source of openfoam-1.6-ext. unfortunately terminal displays: fatal: The remote end hung up unexpectedly MiB 4 KiB/s fatal: early EOFs: 14% (4854/32658), 6.68 MiB fatal: index-pack failed what should i do? best wishes arjang |
|
February 7, 2013, 18:19 |
|
#4 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Arjang,
Try this: Code:
wget https://github.com/ogoe/OpenFOAM-1.6-ext/archive/sf/master.zip unzip master.zip mv OpenFOAM-1.6-ext-sf-master OpenFOAM-1.6-ext Bruno
__________________
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sample Utility not working in OpenFoam 1.6 | titio | OpenFOAM Post-Processing | 6 | November 15, 2014 18:04 |
problem with sampling Utility in openFOAM 1.6 | carmir | OpenFOAM Post-Processing | 10 | February 26, 2014 02:00 |
Problem in recompiling a turbulence model in OpenFoam 2.1.1 | pascool | OpenFOAM Programming & Development | 6 | October 3, 2012 12:03 |
Problem with baffles from Harpoon in OpenFoam | OMN | OpenFOAM | 0 | June 9, 2010 08:59 |
Problem on Installing OpenFOAM 1.6 on Fedora 11 | lzgwhy | OpenFOAM Installation | 1 | August 25, 2009 11:02 |