CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Installation

OpenFOAM Installation for navalFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree3Likes

Reply
 
LinkBack Thread Tools Display Modes
Old   May 22, 2013, 05:25
Default OpenFOAM Installation for navalFoam
  #1
Member
 
Sachin Borse
Join Date: Oct 2011
Location: Pune, Indai
Posts: 40
Rep Power: 5
sachinlb is on a distinguished road
Hi everyone,

Can anyone provide links to download "navalFoam" solvers for OpenFoam

and procedure to install it on Ubuntu 12.0.4., 32 bit and 64 bit versions.

Also provide with the pre-requisites (steps) for its installation.

Currently I have OpenFoam 2.1.1 version installed on my Virtual box.

Thanks in advance
Dr. Sachin.b
sachinlb is offline   Reply With Quote

Old   June 9, 2013, 11:14
Default
  #2
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 8,301
Blog Entries: 34
Rep Power: 84
wyldckat is just really nicewyldckat is just really nicewyldckat is just really nicewyldckat is just really nice
Greetings Dr. Sachin,

Since the Extend repositories are back online, here's what I can figure out:
  1. Note: The following instructions only worked with the Extend's variant OpenFOAM 1.6-ext, they did not work with OpenFOAM 2.1.1.
  2. Clone the repository:
    Code:
    git clone git://git.code.sf.net/p/openfoam-extend/ShipHydroSIG
  3. Go into the folder "src" and issue a clean up:
    Code:
    cd ShipHydroSIG/src
    wclean all
  4. Then build by running:
    Code:
    wmake all
Then go back to the folder "ShipHydroSIG/run" and study the tutorials therein.


Best regards,
Bruno
wyldckat is online now   Reply With Quote

Old   June 11, 2013, 05:11
Default
  #3
Senior Member
 
Nima Sam
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,123
Blog Entries: 1
Rep Power: 14
nimasam is on a distinguished road
Send a message via Yahoo to nimasam
is there any other repositories? i can not download from that repository for low speed connection
__________________
Training Course on OpenFOAM at (http://www.isme.ir/)
My Weblog (http://openfoam.blogfa.com/)
nimasam is offline   Reply With Quote

Old   June 15, 2013, 09:17
Default
  #4
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 8,301
Blog Entries: 34
Rep Power: 84
wyldckat is just really nicewyldckat is just really nicewyldckat is just really nicewyldckat is just really nice
Hi Nima Sam,

I've created a git mirror at repo.or.cz: http://repo.or.cz/w/ShipHydroSIG.git

For cloning, you can use either one of the following commands:
Code:
git clone git://repo.or.cz/ShipHydroSIG.git
git clone http://repo.or.cz/r/ShipHydroSIG.git
Best regards,
Bruno
nimasam and immortality like this.
wyldckat is online now   Reply With Quote

Old   November 20, 2013, 10:42
Default
  #5
Member
 
maryam morta
Join Date: Sep 2013
Posts: 54
Rep Power: 3
mary mor is on a distinguished road
Hi Bruno and all,
I downloaded navalFoam and I was trying to run it with OpenFOAM1.6 ext which I downloaded from debian pack. but after wmake all it gives the below error:

Code:
maryam@maryam-desktop:~/ShipHydroSIG/src$ wmake all
+ wmake libso vofDynamicMesh
wmakeLnInclude: linking include files to ./lnInclude
Making dependency list for source file TaitBryanCoordinateRotation/TaitBryanCoordinateRotation.C
Making dependency list for source file harmonicSolidMotion/harmonicSolidMotion.C
Making dependency list for source file graphSolidMotion/graphSolidMotion.C
Making dependency list for source file excentreRotationFvMesh/excentreRotationFvMesh.C
Making dependency list for source file threeDofMotion/threeDofMotion.C
Making dependency list for source file threeDofMotionSubset/threeDofMotionSubset.C
could not open file tetPointFields.H for source file threeDofMotionSubset/threeDofMotionSubset.C
could not open file faceTetPolyPatch.H for source file threeDofMotionSubset/threeDofMotionSubset.C
could not open file fixedValueTetPolyPatchFields.H for source file threeDofMotionSubset/threeDofMotionSubset.C
Making dependency list for source file floatingBody/floatingBody.C
Making dependency list for source file sixDofMotion/sixDofMotion.C
could not open file tetFemMatrices.H for source file floatingBody/floatingBody.C
could not open file tetPointFields.H for source file floatingBody/floatingBody.C
could not open file faceTetPolyPatch.H for source file floatingBody/floatingBody.C
could not open file tetFemMatrices.H for source file sixDofMotion/sixDofMotion.C
could not open file tetPointFields.H for source file sixDofMotion/sixDofMotion.C
could not open file faceTetPolyPatch.H for source file sixDofMotion/sixDofMotion.C
could not open file fixedValueTetPolyPatchFields.H for source file sixDofMotion/sixDofMotion.C
could not open file fixedValueTetPolyPatchFields.H for source file floatingBody/floatingBody.C
Making dependency list for source file sixDofTopoMotion/sixDofTopoMotion.C
Making dependency list for source file floatingBodyFvMesh/floatingBodyFvMesh.C
could not open file tetFemMatrices.H for source file sixDofTopoMotion/sixDofTopoMotion.C
could not open file faceTetPolyPatch.H for source file sixDofTopoMotion/sixDofTopoMotion.C
could not open file tetFemMatrices.H for source file floatingBodyFvMesh/floatingBodyFvMesh.C
could not open file tetPointFields.H for source file floatingBodyFvMesh/floatingBodyFvMesh.C
could not open file fixedValueTetPolyPatchFields.H for source file sixDofTopoMotion/sixDofTopoMotion.C
could not open file fixedValueTetPolyPatchFields.H for source file floatingBodyFvMesh/floatingBodyFvMesh.C
Making dependency list for source file rasVofForceAndTorque/rasVofForceAndTorqueFunctionObject.C
Making dependency list for source file CICSAM/CICSAM.C
Making dependency list for source file CICSAM/CICSAMDC.C
Making dependency list for source file numericalBeach/numericalBeach.C
Making dependency list for source file fvPatchFields/movingWallSlip/movingWallSlipFvPatchVectorField.C
Making dependency list for source file fvPatchFields/linearWave/linearWaveFvPatchFields.C
Making dependency list for source file fvPatchFields/linearWaveVelocity/linearWaveVelocityFvPatchField.C
Making dependency list for source file fvPatchFields/numericalBeachFvPatchField/numericalBeachFvPatchField.C
SOURCE=TaitBryanCoordinateRotation/TaitBryanCoordinateRotation.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -g -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/LES/LESdeltas/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/TaitBryanCoordinateRotation.o
SOURCE=harmonicSolidMotion/harmonicSolidMotion.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -g -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/LES/LESdeltas/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/harmonicSolidMotion.o
SOURCE=graphSolidMotion/graphSolidMotion.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -g -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/LES/LESdeltas/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicFvMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/tetDecompositionMotionSolver/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/ODE/lnInclude -IlnInclude -I. -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/graphSolidMotion.o
SOURCE=excentreRotationFvMesh/excentreRotationFvMesh.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -g -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/LES/LESdeltas/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/excentreRotationFvMesh.o
SOURCE=threeDofMotion/threeDofMotion.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -g -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/LES/LESdeltas/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/ODE/lnInclude -IlnInclude -I. -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/threeDofMotion.o
threeDofMotion/threeDofMotion.C:34:28: error: tetFemMatrices.H: No such file or directory
threeDofMotion/threeDofMotion.C:35:28: error: tetPointFields.H: No such file or directory
threeDofMotion/threeDofMotion.C:36:30: error: faceTetPolyPatch.H: No such file or directory
threeDofMotion/threeDofMotion.C:37:42: error: fixedValueTetPolyPatchFields.H: No such file or directory
SOURCE=threeDofMotionSubset/threeDofMotionSubset.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -g -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/LES/LESdeltas/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/tetDecompositionFiniteElement/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/tetDecompositionMotionSolver/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/ODE/lnInclude -IlnInclude -I. -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/threeDofMotionSubset.o
threeDofMotionSubset/threeDofMotionSubset.C:34:28: error: tetFemMatrices.H: No such file or directory
threeDofMotionSubset/threeDofMotionSubset.C:35:28: error: tetPointFields.H: No such file or directory
threeDofMotionSubset/threeDofMotionSubset.C:36:30: error: faceTetPolyPatch.H: No such file or directory
threeDofMotionSubset/threeDofMotionSubset.C:37:42: error: fixedValueTetPolyPatchFields.H: No such file or directory
threeDofMotion/threeDofMotion.C: In member function ‘Foam::vector Foam::threeDofMotion::hullForce() const’:
threeDofMotion/threeDofMotion.C:98: warning: unused variable ‘U’
threeDofMotion/threeDofMotion.C: In member function ‘virtual bool Foam::threeDofMotion::update()’:
threeDofMotion/threeDofMotion.C:222: error: ‘tetPointVectorField’ was not declared in this scope
threeDofMotion/threeDofMotion.C:222: error: ‘motionU’ was not declared in this scope
threeDofMotion/threeDofMotion.C:223: error: expected type-specifier before ‘tetPointVectorField’
threeDofMotion/threeDofMotion.C:223: error: expected ‘>’ before ‘tetPointVectorField’
threeDofMotion/threeDofMotion.C:223: error: expected ‘(’ before ‘tetPointVectorField’
threeDofMotion/threeDofMotion.C:223: error: expected primary-expression before ‘>’ token
threeDofMotion/threeDofMotion.C:225: error: ‘tetPointVectorField’ cannot appear in a constant-expression
threeDofMotion/threeDofMotion.C:225: error: no matching function for call to ‘Foam::threeDofMotion::lookupObject(const char [8])’
threeDofMotion/threeDofMotion.C:226: error: expected ‘)’ before ‘;’ token
threeDofMotion/threeDofMotion.C:228: error: ‘fixedValueTetPolyPatchVectorField’ was not declared in this scope
threeDofMotion/threeDofMotion.C:228: error: ‘motionUHullPatch’ was not declared in this scope
threeDofMotion/threeDofMotion.C:229: error: ‘fixedValueTetPolyPatchVectorField’ cannot appear in a constant-expression
make: *** [Make/linuxGccDPOpt/threeDofMotion.o] Error 1
make: *** Waiting for unfinished jobs....
threeDofMotionSubset/threeDofMotionSubset.C: In member function ‘Foam::vector Foam::threeDofMotionSubset::hullForce() const’:
threeDofMotionSubset/threeDofMotionSubset.C:98: warning: unused variable ‘U’
threeDofMotionSubset/threeDofMotionSubset.C: In member function ‘virtual bool Foam::threeDofMotionSubset::update()’:
threeDofMotionSubset/threeDofMotionSubset.C:260: error: ‘tetPointVectorField’ was not declared in this scope
threeDofMotionSubset/threeDofMotionSubset.C:260: error: ‘motionU’ was not declared in this scope
threeDofMotionSubset/threeDofMotionSubset.C:261: error: expected type-specifier before ‘tetPointVectorField’
threeDofMotionSubset/threeDofMotionSubset.C:261: error: expected ‘>’ before ‘tetPointVectorField’
threeDofMotionSubset/threeDofMotionSubset.C:261: error: expected ‘(’ before ‘tetPointVectorField’
threeDofMotionSubset/threeDofMotionSubset.C:261: error: expected primary-expression before ‘>’ token
threeDofMotionSubset/threeDofMotionSubset.C:264: error: ‘tetPointVectorField’ cannot appear in a constant-expression
threeDofMotionSubset/threeDofMotionSubset.C:267: error: no matching function for call to ‘Foam::fvMesh::lookupObject(const char [8])’
threeDofMotionSubset/threeDofMotionSubset.C:268: error: expected ‘)’ before ‘;’ token
threeDofMotionSubset/threeDofMotionSubset.C:284: error: ‘fixedValueTetPolyPatchVectorField’ was not declared in this scope
threeDofMotionSubset/threeDofMotionSubset.C:284: error: ‘motionUHullPatch’ was not declared in this scope
threeDofMotionSubset/threeDofMotionSubset.C:285: error: ‘fixedValueTetPolyPatchVectorField’ cannot appear in a constant-expression
make: *** [Make/linuxGccDPOpt/threeDofMotionSubset.o] Error 1
+ wmake navalFoam
Making dependency list for source file navalFoam.C
SOURCE=navalFoam.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/incompressible/turbulenceModel -I/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicFvMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/meshTools/lnInclude -DFACE_DECOMP -I../vofDynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/ODE/lnInclude -IlnInclude -I. -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/navalFoam.o
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H: In function ‘int main(int, char**)’:
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:9: warning: unused variable ‘momentumPredictor’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:12: warning: unused variable ‘transonic’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readTimeControls.H:40: warning: unused variable ‘maxCo’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readTimeControls.H:43: warning: unused variable ‘maxDeltaT’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:3: warning: unused variable ‘nOuterCorr’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:4: warning: unused variable ‘nCorr’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:9: warning: unused variable ‘momentumPredictor’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:12: warning: unused variable ‘transonic’
readControls.H:28: warning: unused variable ‘startMotionTime’
g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/incompressible/turbulenceModel -I/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicFvMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/meshTools/lnInclude -DFACE_DECOMP -I../vofDynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/ODE/lnInclude -IlnInclude -I. -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC Make/linuxGccDPOpt/navalFoam.o -L/usr/lib/OpenFOAM-1.6-ext/lib \
	     -linterfaceProperties -lincompressibleTransportModels -lincompressibleTurbulenceModel -lincompressibleRASModels -lincompressibleLESModels -lfiniteVolume -ldynamicMesh -ldynamicFvMesh -ltopoChangerFvMesh -lmeshTools -lfaceDecompFiniteElement -lfaceDecompositionMotionSolver -lODE -llduSolvers -L/home/maryam/OpenFOAM/maryam-1.6-ext/lib -lvofDynamicMesh -lOpenFOAM -ldl   -lm -o /home/maryam/OpenFOAM/maryam-1.6-ext/applications/bin/navalFoam
/usr/bin/ld: cannot find -lvofDynamicMesh
collect2: ld returned 1 exit status
make: *** [/home/maryam/OpenFOAM/maryam-1.6-ext/applications/bin/navalFoam] Error 1
+ wmake navalFoamVariant2
Making dependency list for source file navalFoamVariant2.C
SOURCE=navalFoamVariant2.C ;  g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -I/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/incompressible/turbulenceModel -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicFvMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/meshTools/lnInclude -DFACE_DECOMP -I/usr/lib/OpenFOAM-1.6-ext/src/tetDecompositionFiniteElement/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/tetDecompositionMotionSolver/lnInclude -I../vofDynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/ODE/lnInclude -IlnInclude -I. -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linuxGccDPOpt/navalFoamVariant2.o
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H: In function ‘int main(int, char**)’:
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:12: warning: unused variable ‘transonic’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readTimeControls.H:40: warning: unused variable ‘maxCo’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readTimeControls.H:43: warning: unused variable ‘maxDeltaT’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:3: warning: unused variable ‘nOuterCorr’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:4: warning: unused variable ‘nCorr’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:9: warning: unused variable ‘momentumPredictor’
/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/readPIMPLEControls.H:12: warning: unused variable ‘transonic’
readControls.H:28: warning: unused variable ‘startMotionTime’
g++ -m32 -Dlinux -DWM_DP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3  -DNoRepository -ftemplate-depth-40 -I/usr/lib/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/incompressible/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/transportModels/interfaceProperties/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/turbulenceModels/incompressible/turbulenceModel -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/dynamicMesh/dynamicFvMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/meshTools/lnInclude -DFACE_DECOMP -I/usr/lib/OpenFOAM-1.6-ext/src/tetDecompositionFiniteElement/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/tetDecompositionMotionSolver/lnInclude -I../vofDynamicMesh/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/ODE/lnInclude -IlnInclude -I. -I/usr/lib/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/usr/lib/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude   -fPIC Make/linuxGccDPOpt/navalFoamVariant2.o -L/usr/lib/OpenFOAM-1.6-ext/lib \
	     -lfiniteVolume -linterfaceProperties -lincompressibleTransportModels -lincompressibleTurbulenceModel -lincompressibleRASModels -lincompressibleLESModels -ldynamicMesh -ldynamicFvMesh -ltopoChangerFvMesh -lmeshTools -lfaceDecompFiniteElement -lfaceDecompositionMotionSolver -lODE -llduSolvers -L/home/maryam/OpenFOAM/maryam-1.6-ext/lib -lvofDynamicMesh -lOpenFOAM -ldl   -lm -o /home/maryam/OpenFOAM/maryam-1.6-ext/applications/bin/navalFoamVariant2
/usr/bin/ld: cannot find -lvofDynamicMesh
collect2: ld returned 1 exit status
make: *** [/home/maryam/OpenFOAM/maryam-1.6-ext/applications/bin/navalFoamVariant2] Error 1
Could you please tell me what's the problem?
Thanks in advanced.
mary mor is offline   Reply With Quote

Old   November 20, 2013, 18:11
Default
  #6
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 8,301
Blog Entries: 34
Rep Power: 84
wyldckat is just really nicewyldckat is just really nicewyldckat is just really nicewyldckat is just really nice
Hi Maryam,

Unfortunately the Deb packages of 1.6-ext for Ubuntu seem to be too old for ShipHydroSIG
You'll have to build 1.6-ext from source code and probably remove the old version first.

Best regards,
Bruno
wyldckat is online now   Reply With Quote

Old   November 21, 2013, 03:37
Default
  #7
Member
 
maryam morta
Join Date: Sep 2013
Posts: 54
Rep Power: 3
mary mor is on a distinguished road
Thanks Bruno
I had already some problems with this version. For example in floatingObject tutorial the object didn't move!
I searched a little on the forum how to remove debian pack but I got a little confused. Is it possible to guide me how to do this

After that I would try to install source package as described in Wiki.
Thanks so much
mary mor is offline   Reply With Quote

Old   November 21, 2013, 03:47
Default
  #8
Senior Member
 
Nima Sam
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,123
Blog Entries: 1
Rep Power: 14
nimasam is on a distinguished road
Send a message via Yahoo to nimasam
go to synaptic manager and search for foam, you will see those package then you can choose and remove it
__________________
Training Course on OpenFOAM at (http://www.isme.ir/)
My Weblog (http://openfoam.blogfa.com/)
nimasam is offline   Reply With Quote

Old   November 21, 2013, 08:23
Default
  #9
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 8,301
Blog Entries: 34
Rep Power: 84
wyldckat is just really nicewyldckat is just really nicewyldckat is just really nicewyldckat is just really nice
Quote:
Originally Posted by mary mor View Post
I searched a little on the forum how to remove debian pack but I got a little confused. Is it possible to guide me how to do this
You could have asked in the thread where this was explained

To add to Nima's answer (@Nima: don't forget that Synaptic is not installed by default in Ubuntu), simply replace the word "install" with "remove": http://openfoamwiki.net/index.php/In...ucid_10.04_LTS
Code:
sudo apt-get remove openfoam-1.6-ext openfoam-1.6-ext-dev openfoam-1.6-ext-doc
wyldckat is online now   Reply With Quote

Old   November 21, 2013, 08:48
Default
  #10
Senior Member
 
Nima Sam
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,123
Blog Entries: 1
Rep Power: 14
nimasam is on a distinguished road
Send a message via Yahoo to nimasam
@Bruno: I know Ubuntu center is replaced in recent versions of Ubuntu but for Ubuntu.10.04 as i remember, synaptic manager was the default package manager software
wyldckat likes this.
__________________
Training Course on OpenFOAM at (http://www.isme.ir/)
My Weblog (http://openfoam.blogfa.com/)
nimasam is offline   Reply With Quote

Old   November 24, 2013, 08:06
Default
  #11
Member
 
maryam morta
Join Date: Sep 2013
Posts: 54
Rep Power: 3
mary mor is on a distinguished road
@nimasam: I didn't find it by searching foam. synaptic just showed me the openfoam versions installed in opt directory. I found them in the optional section and not by searching foam. shouldn't it show the versions in home directory?

Thanks Bruno, I removed openfoam as you explained.
I know that this topic is about navalFoam but I have another question about shipFoam that I saw was asked in other threads but with no answer. Sorry if I ask here. After runing shipFoam tutorials it searches for alpha1 which is not included in 0 directory. what should I do?

Sorry for inconvenience
Thanks
Maryam
mary mor is offline   Reply With Quote

Old   November 24, 2013, 08:54
Default
  #12
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 8,301
Blog Entries: 34
Rep Power: 84
wyldckat is just really nicewyldckat is just really nicewyldckat is just really nicewyldckat is just really nice
Hi Maryam,

I can't remember where "shipFoam" is available. Can you please indicate where it is available and which thread talks about that same problem?

Best regards,
Bruno
wyldckat is online now   Reply With Quote

Old   November 24, 2013, 14:24
Default
  #13
Member
 
maryam morta
Join Date: Sep 2013
Posts: 54
Rep Power: 3
mary mor is on a distinguished road
Hi
I downloaded it from link: https://github.com/Unofficial-Extend...HydrodynamicIG

and the threads which contains the error I mentioned is:
Hydrostatic Pressure and Gravity #116 & #118

Best regards
mary mor is offline   Reply With Quote

Old   November 24, 2013, 17:14
Default
  #14
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 8,301
Blog Entries: 34
Rep Power: 84
wyldckat is just really nicewyldckat is just really nicewyldckat is just really nicewyldckat is just really nice
Hi Maryam,

The problem is that the file "alpha1.org~" is missing from the tutorials in the old ShipFoam repository. Also, it shouldn't be used by the script Allrun, because (at least on Linux systems) files ending with "~" are backup files.

In theory, it's very simple:
  1. Edit the file "Allrun" and replace "alpha1.org~" with "alpha1.org".
  2. Copy from the OpenFOAM tutorial "multiphase/interFoam/laminar/damBreak" the file "0/alpha1.org" to the folder "0" in the case folder you're working on.
  3. On the case folder you're working on, edit both the file "0/p" and "0/alpha1.org" and use the same boundary names from "0/p" in "0/alpha1.org".
Best regards,
Bruno
wyldckat is online now   Reply With Quote

Old   December 2, 2013, 12:27
Default
  #15
Member
 
maryam morta
Join Date: Sep 2013
Posts: 54
Rep Power: 3
mary mor is on a distinguished road
Hi Bruno
Thanks for reply and sorry for replying late due to a trip. I made alpha regarding to the p file. But it gives error in the process of snappyHexMesh and ShipFoam.

snappyHexMesh.log is like this:
Code:
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  1.6                                   |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 1.6-53b7f692aa41
Exec   : snappyHexMesh -overwrite
Date   : Dec 03 2013
Time   : 02:57:49
Host   : maryam-desktop
PID    : 2998
Case   : /home/maryam/OpenFOAM/shipHydrodynamicIG-master/tutorials/shipFoam/roll
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

// using new solver syntax:
pcorr
{
    solver          PCG;
    tolerance       1e-06;
    relTol          0;
    preconditioner
    {
        preconditioner  GAMG;
        tolerance       1e-06;
        relTol          0;
        smoother        DICGaussSeidel;
        nCellsInCoarsestLevel 10;
        mergeLevels     1;
        agglomerator    faceAreaPair;
        cacheAgglomeration false;
        nPreSweeps      0;
        nPostSweeps     2;
        nFinestSweeps   2;
        scaleCorrection true;
        directSolveCoarsest false;
    }
}

// using new solver syntax:
p
{
    solver          GAMG;
    tolerance       1e-06;
    relTol          0;
    smoother        DIC;
    nCellsInCoarsestLevel 10;
    mergeLevels     1;
    agglomerator    faceAreaPair;
    cacheAgglomeration true;
    nPreSweeps      0;
    nPostSweeps     2;
    nFinestSweeps   2;
    scaleCorrection true;
    directSolveCoarsest false;
}

// using new solver syntax:
pFinal
{
    solver          PCG;
    tolerance       1e-06;
    relTol          0;
    preconditioner
    {
        preconditioner  GAMG;
        tolerance       1e-06;
        relTol          0;
        smoother        DICGaussSeidel;
        nCellsInCoarsestLevel 10;
        mergeLevels     1;
        agglomerator    faceAreaPair;
        cacheAgglomeration true;
        nPreSweeps      2;
        nPostSweeps     2;
        nFinestSweeps   2;
        scaleCorrection true;
        directSolveCoarsest false;
    }
}

// using new solver syntax:
U
{
    solver          smoothSolver;
    tolerance       1e-06;
    relTol          0;
    smoother        GaussSeidel;
    nSweeps         1;
}

// using new solver syntax:
cellMotionU
{
    solver          PCG;
    preconditioner  DIC;
    tolerance       1e-05;
    relTol          0;
}

Read mesh in = 1.48 s

Overall mesh bounding box  : (-3 -3 -3) (3 3 2)
Relative tolerance         : 1e-06
Absolute matching distance : 9.84886e-06



Cannot find file "" in directory "constant/triSurface"

    From function Time::findInstance(const fileName&, const word&, const IOobject::readOption)
    in file db/Time/findInstance.C at line 148.

FOAM exiting
There's no folder triSurface in the constant directory but also in the snappyHexMeshDict, an STL file isn't mentioned. Is one needed?! I saw in other shipFoam files that there is not one. So why do I get error?

So I think here "Hull" patch is not recognized and in file shipFoam.log it gives segmentation fault error and mentiones "Cannot find any patch names matching Hull". Here is the shipFoam.log
Code:
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  1.6                                   |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 1.6-53b7f692aa41
Exec   : shipFoam
Date   : Dec 03 2013
Time   : 02:57:53
Host   : maryam-desktop
PID    : 3009
Case   : /home/maryam/OpenFOAM/shipHydrodynamicIG-master/tutorials/shipFoam/roll
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
// using new solver syntax:
pcorr
{
    solver          PCG;
    tolerance       1e-06;
    relTol          0;
    preconditioner
    {
        preconditioner  GAMG;
        tolerance       1e-06;
        relTol          0;
        smoother        DICGaussSeidel;
        nCellsInCoarsestLevel 10;
        mergeLevels     1;
        agglomerator    faceAreaPair;
        cacheAgglomeration false;
        nPreSweeps      0;
        nPostSweeps     2;
        nFinestSweeps   2;
        scaleCorrection true;
        directSolveCoarsest false;
    }
}

// using new solver syntax:
p
{
    solver          GAMG;
    tolerance       1e-06;
    relTol          0;
    smoother        DIC;
    nCellsInCoarsestLevel 10;
    mergeLevels     1;
    agglomerator    faceAreaPair;
    cacheAgglomeration true;
    nPreSweeps      0;
    nPostSweeps     2;
    nFinestSweeps   2;
    scaleCorrection true;
    directSolveCoarsest false;
}

// using new solver syntax:
pFinal
{
    solver          PCG;
    tolerance       1e-06;
    relTol          0;
    preconditioner
    {
        preconditioner  GAMG;
        tolerance       1e-06;
        relTol          0;
        smoother        DICGaussSeidel;
        nCellsInCoarsestLevel 10;
        mergeLevels     1;
        agglomerator    faceAreaPair;
        cacheAgglomeration true;
        nPreSweeps      2;
        nPostSweeps     2;
        nFinestSweeps   2;
        scaleCorrection true;
        directSolveCoarsest false;
    }
}

// using new solver syntax:
U
{
    solver          smoothSolver;
    tolerance       1e-06;
    relTol          0;
    smoother        GaussSeidel;
    nSweeps         1;
}

// using new solver syntax:
cellMotionU
{
    solver          PCG;
    preconditioner  DIC;
    tolerance       1e-05;
    relTol          0;
}

Selecting motion solver: velocityLaplacian
Selecting motion diffusion: quadratic
Selecting motion diffusion: inverseDistance
--> FOAM Warning : 
    From function polyBoundaryMesh::patchSet(const wordList&)
    in file meshes/polyMesh/polyBoundaryMesh/polyBoundaryMesh.C at line 428
    Cannot find any patch names matching Hull

Reading g
Reading field p

Reading field alpha1

Reading field U

Reading/calculating face flux field phi

Reading transportProperties

Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Selecting turbulence model type RASModel
Selecting RAS turbulence model laminar
time step continuity errors : sum local = 0, global = 0, cumulative = 0
GAMGPCG:  Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
GAMGPCG:  Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
time step continuity errors : sum local = 0, global = 0, cumulative = 0
Courant Number mean: 0 max: 0
motionPatches : 
1
(
Hull
)

Spring coefficients are updated every 25 timesteps. 
Selecting ODE solver RK

Starting time loop

Courant Number mean: 0 max: 0
deltaT = 0.00119048
Time = 0.00119048

--> FOAM Warning : 
    From function polyBoundaryMesh::patchSet(const wordList&)
    in file meshes/polyMesh/polyBoundaryMesh/polyBoundaryMesh.C at line 428
    Cannot find any patch names matching Hull
DICPCG:  Solving for cellMotionUx, Initial residual = 0, Final residual = 0, No Iterations 0
DICPCG:  Solving for cellMotionUy, Initial residual = 0, Final residual = 0, No Iterations 0
DICPCG:  Solving for cellMotionUz, Initial residual = 0, Final residual = 0, No Iterations 0
Execution time for mesh.update() = 1.63 s
time step continuity errors : sum local = 0, global = 0, cumulative = 0
GAMGPCG:  Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
GAMGPCG:  Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
time step continuity errors : sum local = 0, global = 0, cumulative = 0
MULES: Solving for alpha1
MULES: Solving for alpha1
Liquid phase volume fraction = 0.6  Min(alpha1) = 0  Max(alpha1) = 1
smoothSolver:  Solving for Ux, Initial residual = 1, Final residual = 4.07894e-11, No Iterations 2
smoothSolver:  Solving for Uy, Initial residual = 1, Final residual = 4.33486e-11, No Iterations 2
smoothSolver:  Solving for Uz, Initial residual = 1, Final residual = 8.83969e-07, No Iterations 1
GAMG:  Solving for p, Initial residual = 1, Final residual = 8.02023e-07, No Iterations 12
GAMG:  Solving for p, Initial residual = 7.27861e-09, Final residual = 7.27861e-09, No Iterations 0
Relaxation: p = 0.2
time step continuity errors : sum local = 8.91921e-10, global = -3.87101e-10, cumulative = -3.87101e-10
GAMG:  Solving for p, Initial residual = 0.0350296, Final residual = 5.76441e-07, No Iterations 8
GAMG:  Solving for p, Initial residual = 1.19759e-07, Final residual = 1.19759e-07, No Iterations 0
Relaxation: p = 0.2
time step continuity errors : sum local = 1.46402e-08, global = -6.25832e-09, cumulative = -6.64542e-09
GAMG:  Solving for p, Initial residual = 0.0158985, Final residual = 5.64018e-07, No Iterations 7
GAMGPCG:  Solving for p, Initial residual = 2.06908e-07, Final residual = 2.06908e-07, No Iterations 0
Relaxation: p = 0.2
time step continuity errors : sum local = 2.52498e-08, global = -1.06459e-08, cumulative = -1.72913e-08
#0  Foam::error::printStack(Foam::Ostream&) in "/home/maryam/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libOpenFOAM.so"
#1  Foam::sigSegv::sigSegvHandler(int) in "/home/maryam/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libOpenFOAM.so"
#2  Uninterpreted: 
#3  Foam::tmp<Foam::Field<Foam::innerProduct<Foam::Tensor<double>, Foam::Vector<double> >::type> > Foam::operator&<Foam::Tensor<double>, double, 9, Foam::Vector<double> >(Foam::VectorSpace<Foam::Tensor<double>, double, 9> const&, Foam::UList<Foam::Vector<double> > const&) in "/home/maryam/OpenFOAM/maryam-1.6/applications/bin/linuxGccDPOpt/shipFoam"
#4  
 in "/home/maryam/OpenFOAM/maryam-1.6/applications/bin/linuxGccDPOpt/shipFoam"
#5  
 in "/home/maryam/OpenFOAM/maryam-1.6/applications/bin/linuxGccDPOpt/shipFoam"
#6  __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
#7  
 in "/home/maryam/OpenFOAM/maryam-1.6/applications/bin/linuxGccDPOpt/shipFoam"
Segmentation fault
what is "Segmention falut" due to?!
I appreciate your help and anyother help. I really need this work.

Thanks
Best
mary mor is offline   Reply With Quote

Old   December 2, 2013, 12:51
Default
  #16
Member
 
maryam morta
Join Date: Sep 2013
Posts: 54
Rep Power: 3
mary mor is on a distinguished road
Besides, about navalFoam I ran the tutorials. the procedures are Ok until running navalFoam.
It says:
--> FOAM FATAL ERROR:
Unknown AMG policy AAMG

Valid AMG policies are :

1
(
PAMG
)


There's no AAMG policy defined in my OpenFOAM1.6-ext that is used in fvSolution. Can I download it? or Can I change it to PAMG?

Thanks
Best
mary mor is offline   Reply With Quote

Old   December 8, 2013, 14:47
Default
  #17
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 8,301
Blog Entries: 34
Rep Power: 84
wyldckat is just really nicewyldckat is just really nicewyldckat is just really nicewyldckat is just really nice
Hi Maryam,

AAMG was taken out due to some crazy issues with ANSYS: OF 1.6-ext Repository offline? post #51.

Therefore, you can try PAMG, but I have no clue if it will work.

As for the other issue with shipFoam, I won't be able to look into this before the 25th of December.

Best regards,
Bruno
wyldckat is online now   Reply With Quote

Old   December 10, 2013, 05:11
Default
  #18
Member
 
maryam morta
Join Date: Sep 2013
Posts: 54
Rep Power: 3
mary mor is on a distinguished road
Hi Bruno
Thanks for reply.
So it sounds important for ANSYS
I ran the tutrorial with PAMG. Although I can't get a vision how exact would be the results compared with AAMG.

About shipFoam I added an empty folder in contast directory, named it:triSurface and it started to work. Also I added turbulence properties and restraints which worked.
Then I tried to change the size of the box. As for floatingObject tutorial in official version that crashes by changing the size,it run very slowly and then crashed. But it seems others have used it with no problem. where am I wrong?!
I'm afraid navalFoam has the same problem.

Best regards
Maryam
mary mor is offline   Reply With Quote

Old   December 13, 2013, 09:39
Default
  #19
Member
 
maryam morta
Join Date: Sep 2013
Posts: 54
Rep Power: 3
mary mor is on a distinguished road
Thanks, I got it work
mary mor is offline   Reply With Quote

Old   March 2, 2014, 08:08
Default
  #20
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 8,301
Blog Entries: 34
Rep Power: 84
wyldckat is just really nicewyldckat is just really nicewyldckat is just really nicewyldckat is just really nice
Greetings to all!

A wiki page is finally available for this precious toolkit: http://openfoamwiki.net/index.php/Ex...s/ShipHydroSIG
Keep in mind that anyone and everyone is welcome to contribute, either to the wiki or by creating+sharing forks of the source code.

Best regards,
Bruno
wyldckat is online now   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenFOAM 1.7.1 installation on LINUX UBUNTU 10.10 electrosin OpenFOAM Installation 39 July 1, 2014 07:55
[Discussion] Restructuring the Installation page at openfoamwiki.net wyldckat OpenFOAM Installation 16 November 2, 2013 12:43
Openfoam 2.1 installation in ubuntu 12.04 jsm OpenFOAM Installation 11 May 7, 2012 04:56
Installation of OpenFOAM 1.7.1 to OprnSUSE 11.2 superfxfund OpenFOAM Installation 3 November 11, 2010 03:15
Some Query on Installation of OpenFoam lzgwhy OpenFOAM Installation 1 July 15, 2009 03:20


All times are GMT -4. The time now is 08:05.