[samiam1000]

Dear All,

I am trying to install OpenFOAM 1.7.1 on Ubuntu Maverick. Everything goes well, until I install Paraview.

Following this page, I get:

samiam@penrose:~/OpenFOAM/ThirdParty-1.7.1$ ./makeParaView
ParaView_SOURCE_DIR=/home/samiam/OpenFOAM/ThirdParty-1.7.1/paraview-3.8.0
ParaView_BINARY_DIR=/home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/build-linux64Gcc/paraview-3.8.0
ParaView_DIR=/home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0
date-stamp: 2010-03-26

Build stages selected
---------------------
    -config   true
    -make     true
    -install  true
---------------------
Features selected
    mesa      false
    mpi       false
    python    false
    qt        true
---------------------
Version information
    version   3.8.0
    major     3.8
---------------------
removing old build directory
    /home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/build-linux64Gcc/paraview-3.8.0
----
Configuring paraview-3.8.0 (major version: 3.8)
    MPI    support : false
    Python support : false
    MESA   support : false
    Qt dev support : true
    Source         : /home/samiam/OpenFOAM/ThirdParty-1.7.1/paraview-3.8.0
    Build          : /home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/build-linux64Gcc/paraview-3.8.0
    Target         : /home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0
----

cmake -DCMAKE_INSTALL_PREFIX:PATH=/home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0 -DVTK_USE_TK:BOOL=OFF -DBUILD_SHARED_LIBS:BOOL=ON -DVTK_USE_RPATH:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=Release -DPARAVIEW_INSTALL_DEVELOPMENT:BOOL=ON -DPARAVIEW_GENERATE_PROXY_DOCUMENTATION:BOOL=ON -DPARAVIEW_GENERATE_PROXY_DOCUMENTATION=OFF -DPARAVIEW_BUILD_QT_GUI=ON /home/samiam/OpenFOAM/ThirdParty-1.7.1/paraview-3.8.0

----

./makeParaView: 295: cmake: not found
    Starting make
make: *** No targets specified and no makefile found.  Stop.
Command exited with non-zero status 2
0.00user 0.00system 0:00.00elapsed 0%CPU (0avgtext+0avgdata 4400maxresident)k
0inputs+0outputs (0major+330minor)pagefaults 0swaps
    Done make
    Installing ParaView to /home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0
make: *** No rule to make target `install'.  Stop.
    ---
    Installation complete for paraview-3.8.0
    Set environment variables:

        export ParaView_DIR=/home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0
        export PATH=$ParaView_DIR/bin:$PATH
        export PV_PLUGIN_PATH=$FOAM_LIBBIN/paraview-3.8
    ---

Done
samiam@penrose:~/OpenFOAM/ThirdParty-1.7.1$ ./makeParaView
ParaView_SOURCE_DIR=/home/samiam/OpenFOAM/ThirdParty-1.7.1/paraview-3.8.0
ParaView_BINARY_DIR=/home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/build-linux64Gcc/paraview-3.8.0
ParaView_DIR=/home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0
date-stamp: 2010-03-26

Build stages selected
---------------------
    -config   true
    -make     true
    -install  true
---------------------
Features selected
    mesa      false
    mpi       false
    python    false
    qt        true
---------------------
Version information
    version   3.8.0
    major     3.8
---------------------
removing old build directory
    /home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/build-linux64Gcc/paraview-3.8.0
----
Configuring paraview-3.8.0 (major version: 3.8)
    MPI    support : false
    Python support : false
    MESA   support : false
    Qt dev support : true
    Source         : /home/samiam/OpenFOAM/ThirdParty-1.7.1/paraview-3.8.0
    Build          : /home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/build-linux64Gcc/paraview-3.8.0
    Target         : /home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0
----

cmake -DCMAKE_INSTALL_PREFIX:PATH=/home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0 -DVTK_USE_TK:BOOL=OFF -DBUILD_SHARED_LIBS:BOOL=ON -DVTK_USE_RPATH:BOOL=OFF -DCMAKE_BUILD_TYPE:STRING=Release -DPARAVIEW_INSTALL_DEVELOPMENT:BOOL=ON -DPARAVIEW_GENERATE_PROXY_DOCUMENTATION:BOOL=ON -DPARAVIEW_GENERATE_PROXY_DOCUMENTATION=OFF -DPARAVIEW_BUILD_QT_GUI=ON /home/samiam/OpenFOAM/ThirdParty-1.7.1/paraview-3.8.0

----

./makeParaView: 295: cmake: not found
    Starting make
make: *** No targets specified and no makefile found.  Stop.
Command exited with non-zero status 2
0.00user 0.00system 0:00.00elapsed 0%CPU (0avgtext+0avgdata 4400maxresident)k
0inputs+0outputs (0major+329minor)pagefaults 0swaps
    Done make
    Installing ParaView to /home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0
make: *** No rule to make target `install'.  Stop.
    ---
    Installation complete for paraview-3.8.0
    Set environment variables:

        export ParaView_DIR=/home/samiam/OpenFOAM/ThirdParty-1.7.1/platforms/linux64Gcc/paraview-3.8.0
        export PATH=$ParaView_DIR/bin:$PATH
        export PV_PLUGIN_PATH=$FOAM_LIBBIN/paraview-3.8
    ---

Done
samiam@penrose:~/OpenFOAM/ThirdParty-1.7.1$

Can you help to fix this??

Thanks a lot,

Samuele.