|July 4, 2012, 10:56||
Using the mesh generated through gmsh in OpenFOAM
Join Date: Jul 2012
Posts: 3Rep Power: 6
I am trying to convert the mesh generated through gmesh to Foam.But I am getting the following error:
--> FOAM FATAL IO ERROR:
No cells read from file "cyl.msh"
Does your file specify any 3D elements (hex=5, prism=6, pyramid=7, tet=4)?
Perhaps you have not exported the 3D elements?
file: cyl.msh at line 30956.
From function readCells(..)
in file gmshToFoam.C at line 721.
|March 20, 2013, 05:39||
Join Date: Dec 2012
Posts: 64Rep Power: 5
The error seems to be pretty clear, what kind of mesh are you trying to convert? Did you define the physicals properly in your .geo?
|July 13, 2015, 09:22||
Join Date: Mar 2015
Posts: 198Rep Power: 3
I have the same problem. I managed to create physical surfaces and the physical volume and they even show up in gmsh. But how can you make your internal 3D cells physical?
Additional question: How can I display my internal mesh in gmsh?
p.s.: I think gmsh is an app which can produce beautiful products but it is very hard to understand how you actually do thing.
|Thread||Thread Starter||Forum||Replies||Last Post|
|SnappyHexMesh for internal Flow||vishwa||OpenFOAM Native Meshers: snappyHexMesh and Others||24||June 27, 2016 08:54|
|vtk mesh or Abaqus mesh to OpenFOAM||bigphil||Open Source Meshers: Gmsh, Netgen, CGNS, ...||27||November 23, 2015 18:31|
|failed 1 mesh checks (gmsh)||appa||Open Source Meshers: Gmsh, Netgen, CGNS, ...||2||July 30, 2015 17:09|
|Moving mesh||Niklas Wikstrom (Wikstrom)||OpenFOAM Running, Solving & CFD||122||June 15, 2014 06:20|
|snappyHexMesh won't work - zeros everywhere!||sc298||OpenFOAM Native Meshers: snappyHexMesh and Others||2||March 27, 2011 21:11|