[Salome] salome installing problem

vipin1431 · June 21, 2015, 14:56

i had install selome but after we have to run Salome-V7_5_1-LGPL-x86_64.run file. i am trying it on terminal but getting msg as permission denied.
pls help to sort this out.

thanking u

vipin

wyldckat · June 21, 2015, 15:59

Greetings Vipin and welcome to the forum!

As explained here: http://www.cfd-online.com/Forums/ope...ssed-here.html - it might be best that you ask about this on Salome's own forum: http://www.salome-platform.org/forum

Good luck! Best regards,
Bruno

elvis · June 24, 2015, 08:37

Hi,
did you use the "chmod"-command https://en.wikipedia.org/wiki/Chmod to change permission?

vipin1431 · June 25, 2015, 00:35

hi elvis,
thank you for that information. it is perfectly working now.

elvis · June 25, 2015, 04:22

Hi,

nice to hear that that easy thing was your problem ;-)
so happy meshing with salome

vipin1431 · June 25, 2015, 06:13

hi Elvis
if u have some basic tutorials regarding salome please send me. i get truck in mesh generation in salome and again move towards blockMeshDict :-(

thanks

June 21, 2015, 14:56	salome installing problem	#1
vipin1431 New Member vipin Join Date: Jun 2015 Posts: 14 Rep Power: 10	i had install selome but after we have to run Salome-V7_5_1-LGPL-x86_64.run file. i am trying it on terminal but getting msg as permission denied. pls help to sort this out. thanking u vipin

June 21, 2015, 15:59		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Vipin and welcome to the forum! As explained here: http://www.cfd-online.com/Forums/ope...ssed-here.html - it might be best that you ask about this on Salome's own forum: http://www.salome-platform.org/forum Good luck! Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with installing OpenFOAM 2.0.X	mohsen.boojari	OpenFOAM Installation	3	February 3, 2016 11:41
[foam-extend.org] problem when installing foam-extend-1.6	Thomas pan	OpenFOAM Installation	7	September 9, 2015 21:53
[pythonFlu] Problem installing pythonFlu	PonchO	OpenFOAM Community Contributions	3	September 19, 2013 06:25
[Salome] Problem with tetrahedral-mesh (salome)	matthiass	OpenFOAM Meshing & Mesh Conversion	5	March 20, 2012 14:52
problem installing gcc	Ahmed Khattab	OpenFOAM Installation	8	March 24, 2010 11:42

June 24, 2015, 08:37		#3
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi, did you use the "chmod"-command https://en.wikipedia.org/wiki/Chmod to change permission?

June 25, 2015, 00:35		#4
vipin1431 New Member vipin Join Date: Jun 2015 Posts: 14 Rep Power: 10	hi elvis, thank you for that information. it is perfectly working now.

June 25, 2015, 04:22		#5
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi, nice to hear that that easy thing was your problem ;-) so happy meshing with salome

June 25, 2015, 06:13		#6
vipin1431 New Member vipin Join Date: Jun 2015 Posts: 14 Rep Power: 10	hi Elvis if u have some basic tutorials regarding salome please send me. i get truck in mesh generation in salome and again move towards blockMeshDict :-( thanks