|
[Sponsors] |
November 10, 2010, 08:12 |
sHM - reconstructPar
|
#1 |
Super Moderator
Tobias Holzmann
Join Date: Oct 2010
Location: Tussenhausen
Posts: 2,708
Blog Entries: 6
Rep Power: 51 |
Hi all,
i run snappy with 6 cores. After it, i will reconstruct it again. But how?! Code:
tobi@tobi:~/OpenFOAM/tobi-1.7.x/run/teg$ reconstructPar -constant /*---------------------------------------------------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: 1.7.x | | \\ / A nd | Web: www.OpenFOAM.com | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ Build : 1.7.x-2154baf2ac24 Exec : reconstructPar -constant Date : Nov 10 2010 Time : 14:10:51 Host : tobi PID : 2687 Case : /home/tobi/OpenFOAM/tobi-1.7.x/run/teg nProcs : 1 SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE). // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Create mesh for time = 0 --> FOAM FATAL IO ERROR: cannot open file file: /home/tobi/OpenFOAM/tobi-1.7.x/run/teg/processor0/0/polyMesh/pointProcAddressing at line 0. From function regIOobject::readStream() in file db/regIOobject/regIOobjectRead.C at line 61. FOAM exiting Any ideas. Tobi |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] different sHM results on same geometry when everythin is in one or several stl-files. | Laika | OpenFOAM Meshing & Mesh Conversion | 1 | September 8, 2016 04:09 |
reconstructPar nor working | Priya Somasundaran | OpenFOAM Post-Processing | 2 | January 28, 2016 14:37 |
[snappyHexMesh] shm in parallel with simple decomposition | mihaipruna | OpenFOAM Meshing & Mesh Conversion | 6 | July 16, 2015 04:55 |
[snappyHexMesh] troubles with sHM and parallel | Tobi | OpenFOAM Meshing & Mesh Conversion | 1 | August 30, 2012 17:54 |
reconstructPar and a high number of snapshots | fs82 | OpenFOAM Programming & Development | 2 | April 18, 2012 04:37 |