|
[Sponsors] |
December 9, 2013, 11:16 |
data extaction of boundary layer thickness
|
#1 |
New Member
Karthik Goli
Join Date: Nov 2013
Posts: 7
Rep Power: 12 |
Hi
I would like to validate my results of flow over a flat plate with blasius solution. I run the case in simplefoam and i could see my results in parafoam. However i would like to compare the boundary layer thickness with blasius solution along the flat plate, but unsuccessful in extracting the data from the results i got. I am trying to extract the data from parafoam is that possible, i also tried using sampledict file but it shows nothing. How can i extract the data from the results i got. Please help me with your suggestions. Thank You Karthik Goli |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
Boundary Layer roughness/ low reynolds wall treatment | Luigi_ | STAR-CCM+ | 1 | March 14, 2012 08:40 |
Wall coordinates and boundary layer thickness | bentmol | Main CFD Forum | 1 | July 3, 2011 20:44 |
Boundary layer thickness in Xfoil | Nixmich | Main CFD Forum | 5 | January 27, 2011 03:59 |
Convective Heat Transfer - Heat Exchanger | Mark | CFX | 6 | November 15, 2004 15:55 |