CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Post-Processing

[paraFoam]More than six unsigned transforms detected?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 16, 2012, 19:35
Default [paraFoam]More than six unsigned transforms detected?
  #1
New Member
 
Hsingtzu Wu
Join Date: Feb 2011
Posts: 21
Rep Power: 6
hsingtzu is on a distinguished road
Hello

My model had cyclic boundary conditions. checkMesh OK. I used icoFoam to solve it, and the courant number was always less than 1. However, when I was using paraFoam to view the result, I got the following error message.

Code:
--> FOAM FATAL ERROR: 
More than six unsigned transforms detected:
6(((-1.26 0.207 1.38778e-17) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 -0.069 0) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 0.802 -1.38778e-17) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 -0.654 0) (1 0 0 0 1 0 0 0 1) 0) ((-1.191 -1.26 0) (1 0 0 0 1 0 0 0 1) 0) ((-0.777 -1.26 0) (1 0 0 0 1 0 0 0 1) 0))
I had searched through the Internet, but I got no clue
I was wondering if anyone could kindly provide some suggestions
the package is available at http://dl.dropbox.com/u/20517550/cell3.zip

Thanks
Hsingtzu
hsingtzu is offline   Reply With Quote

Old   July 15, 2014, 04:48
Default
  #2
Senior Member
 
Julien
Join Date: Jun 2012
Location: France
Posts: 153
Rep Power: 5
Djub is on a distinguished road
Hi M. Wu,

Did you solve your problem ? I have a similar problem using sHM (cf. this thread on cfd-online.com).
Thank you,
Djub is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
unsigned transforms detected Smed OpenFOAM Post-Processing 5 July 17, 2014 12:18
Divergence detected in AMG solver: ads-0 Patrino FLUENT 4 April 18, 2014 01:53
Quarter Burner mesh with periosic condition SamCanuck FLUENT 2 August 31, 2011 11:34
user subroutine error CFDUSER CFX 2 December 9, 2006 07:31
user defined function cfduser CFX 0 April 29, 2006 10:58


All times are GMT -4. The time now is 21:18.