|
[Sponsors] |
[swak4Foam] what does these Swak post processing mean? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 27, 2013, 17:46 |
what does these Swak post processing mean?
|
#1 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
what does this warnining mean?
Code:
--> FOAM Warning : From function SampledSurface &SurfacesRepository::getSurface in file repositories/SurfacesRepository.C at line 130 Already got a surface named normal_Plane_1. There is a specification for the surface here which is ignored. It is: { type plane; basePoint ( 0.01725 0.002 0 ); normalVector ( 1 0 0 ); interpolate true; } --> FOAM Warning : From function SampledSurface &SurfacesRepository::getSurface in file repositories/SurfacesRepository.C at line 130 Already got a surface named normal_Plane_1. There is a specification for the surface here which is ignored. It is: { type plane; basePoint ( 0.01725 0.002 0 ); normalVector ( 1 0 0 ); interpolate true; } --> FOAM Warning : From function SampledSurface &SurfacesRepository::getSurface in file repositories/SurfacesRepository.C at line 130 Already got a surface named normal_Plane_1. There is a specification for the surface here which is ignored. It is: { type plane; basePoint ( 0.01725 0.002 0 ); normalVector ( 1 0 0 ); interpolate true; } --> FOAM Warning : From function SampledSurface &SurfacesRepository::getSurface in file repositories/SurfacesRepository.C at line 130 Code:
surfacePlane_n1_velocity { type swakExpression; valueType surface; surfaceName normal_Plane_1; verbose true; surface { type plane; basePoint (0.01725 0.002 0); normalVector (1 0 0); interpolate true; } expression "mag(U)"; accumulations ( min max average ); } surfacePlane_n1_pressure { $surfacePlane_n1_velocity; expression "p"; } surfacePlane_n1_Temperature { $surfacePlane_n1_velocity; expression "T"; } surfacePlane_n1_totalPressure { $surfacePlane_n1_velocity; expression "p+.5*rho*magSqr(U)"; }
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. Last edited by immortality; April 30, 2013 at 06:08. |
|
April 29, 2013, 07:47 |
|
#2 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
it displayes a warning error that "the plane is specified".
I think its because of $surfacePlane_n1_velocity; that defines the plane again.how can I except it to not repeat in other functions? a hint?
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
April 29, 2013, 11:28 |
|
#3 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
which lines should be mentioned since this warning not to be displayed and also avoid repeated things?
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
April 29, 2013, 18:16 |
|
#4 | |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Ehsan,
I got the private message you sent me. You could have told me which thread you were talking about, so that I wouldn't have to look for it . And sorry, but this is a bit too obvious So I'm going to answer in a playful way I'm going to do a magic trick... You have this: Quote:
Code:
surfacePlane_n1_pressure { $surfacePlane_n1_velocity; expression "p"; surfaceName normal_Plane_2; } Code:
expression "p"; Code:
expression "mag(U)"; Best regards, Bruno
__________________
|
||
April 30, 2013, 06:03 |
|
#5 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
thanks for answer.I'm sorry for that.I forgot it again!
I had tested it before.but the warning persists: Code:
swak4Foam: Allocating new repository for sampledSurfaces --> FOAM Warning : From function SampledSurface &SurfacesRepository::getSurface in file repositories/SurfacesRepository.C at line 130 Already got a surface named normal_Plane_1. There is a specification for the surface here which is ignored. It is: { type plane; basePoint ( 0.01725 0.002 0 ); normalVector ( 1 0 0 ); interpolate true; } --> FOAM Warning : From function SampledSurface &SurfacesRepository::getSurface in file repositories/SurfacesRepository.C at line 130 Already got a surface named normal_Plane_1. There is a specification for the surface here which is ignored. It is: { type plane; basePoint ( 0.01725 0.002 0 ); normalVector ( 1 0 0 ); interpolate true; } --> FOAM Warning : From function SampledSurface &SurfacesRepository::getSurface in file repositories/SurfacesRepository.C at line 130 Already got a surface named normal_Plane_1. There is a specification for the surface here which is ignored. It is: { type plane; basePoint ( 0.01725 0.002 0 ); normalVector ( 1 0 0 ); interpolate true; } --> FOAM Warning : From function SampledSurface &SurfacesRepository::getSurface in file repositories/SurfacesRepository.C at line 130 Code:
surfacePlane_n1_velocity { type swakExpression; valueType surface; surfaceName normal_Plane_1; verbose true; surface { type plane; basePoint (0.01725 0.002 0); normalVector (1 0 0); interpolate true; } expression "mag(U)"; accumulations ( min max average ); } surfacePlane_n1_pressure { $surfacePlane_n1_velocity; surfaceName normal_Plane_1; expression "p"; } surfacePlane_n1_Temperature { $surfacePlane_n1_velocity; surfaceName normal_Plane_1; expression "T"; } surfacePlane_n1_totalPressure { $surfacePlane_n1_velocity; surfaceName normal_Plane_1; expression "p+.5*rho*magSqr(U)"; } (all functions are on one surface)
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
April 30, 2013, 06:25 |
|
#6 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
and how can i delete a repeated post of mine like above?
i can't find any button in edit!
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
April 30, 2013, 17:41 |
|
#7 | ||
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Ehsan,
It looks like you're getting pretty tired... didn't you notice something different in the line I added? Quote:
Quote:
If you need a post to be deleted, report your own post through the triangle on the lower left corner of the post: The other possibility is to edit the second post, remove all of the content and replace with something like "sorry, accidental double-post". Best regards, Bruno edit: I forgot to mention that I've deleted the repeated post.
__________________
Last edited by wyldckat; April 30, 2013 at 17:42. Reason: see "edit:" |
|||
May 1, 2013, 04:17 |
|
#8 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
i thought you have mistakenly understand it.so you mean introduce a different name for the same plane(only due to field difference)?
i thought that was only related to threads not the poor posts!
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
May 1, 2013, 04:45 |
|
#9 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
The idea is to use different names for each plane. The planes will all have the same definitions, but different names.
__________________
|
|
May 1, 2013, 05:02 |
|
#10 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
you mean different names for one plane.do i understand truely?
its fine now.without warning. but a question:is there any way to put all folders to a single folder and organizing them ?because its a lot of crowd there!
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. Last edited by immortality; May 1, 2013 at 05:31. |
|
May 1, 2013, 10:54 |
|
#11 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
It depends... do the files inside those folders have the same name?
__________________
|
|
May 1, 2013, 11:41 |
|
#12 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
no their names are different due to different function names.
I only wanted a little more arrangement. if its not simple I guess its so its not important at all.never mind dear Bruno.thank you.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
May 1, 2013, 14:02 |
|
#13 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Well, if the names are different, then you can follow this example:
__________________
|
|
May 1, 2013, 15:06 |
|
#14 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
then should not be vwey difficult!
folders are like Code:
ehsan@Ehsan-com:~/Desktop/WR_pimple_p/swakExpression_pressure_left$ tree . ├── 0 │ └── pressure_left ├── 0.000124 │ └── pressure_left ├── 0.000231 │ └── pressure_left ├── 0.000239 │ └── pressure_left ├── 0.0003 │ └── pressure_left ├── 0.000475 │ └── pressure_left ├── 0.00049 │ └── pressure_left ├── 0.00053 │ └── pressure_left ├── 0.000539 │ └── pressure_left ├── 0.000544 │ └── pressure_left ├── 0.000558 │ └── pressure_left ├── 0.000563 │ └── pressure_left ├── 0.000616 │ └── pressure_left ├── 0.000652 │ └── pressure_left ├── 0.000666 │ └── pressure_left ├── 0.000668 │ └── pressure_left ├── 0.000696 │ └── pressure_left └── 0.000699 └── pressure_left Code:
ehsan@Ehsan-com:~/Desktop/WR_pimple_p/swakExpression_surfacePlane_h1_totalPressure$ tree . ├── 0 │ └── surfacePlane_h1_totalPressure ├── 0.000124 │ └── surfacePlane_h1_totalPressure ├── 0.000231 │ └── surfacePlane_h1_totalPressure ├── 0.000239 │ └── surfacePlane_h1_totalPressure ├── 0.0003 │ └── surfacePlane_h1_totalPressure ├── 0.000475 │ └── surfacePlane_h1_totalPressure ├── 0.00049 │ └── surfacePlane_h1_totalPressure ├── 0.00053 │ └── surfacePlane_h1_totalPressure ├── 0.000539 │ └── surfacePlane_h1_totalPressure ├── 0.000544 │ └── surfacePlane_h1_totalPressure ├── 0.000558 │ └── surfacePlane_h1_totalPressure ├── 0.000563 │ └── surfacePlane_h1_totalPressure ├── 0.000616 │ └── surfacePlane_h1_totalPressure ├── 0.000652 │ └── surfacePlane_h1_totalPressure ├── 0.000666 │ └── surfacePlane_h1_totalPressure ├── 0.000668 │ └── surfacePlane_h1_totalPressure ├── 0.000696 │ └── surfacePlane_h1_totalPressure └── 0.000699 └── surfacePlane_h1_totalPressure Code:
swakExpression_surfacePlane_n2_Temperature │ ├── 0 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000124 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000231 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000239 │ │ └── surfacePlane_n2_Temperature │ ├── 0.0003 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000475 │ │ └── surfacePlane_n2_Temperature │ ├── 0.00049 │ │ └── surfacePlane_n2_Temperature │ ├── 0.00053 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000539 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000544 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000558 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000563 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000616 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000652 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000666 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000668 │ │ └── surfacePlane_n2_Temperature │ ├── 0.000696 │ │ └── surfacePlane_n2_Temperature │ └── 0.000699 │ └── surfacePlane_n2_Temperature ├── swakExpression_surfacePlane_n2_totalPressure │ ├── 0 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000124 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000231 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000239 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.0003 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000475 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.00049 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.00053 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000539 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000544 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000558 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000563 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000616 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000652 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000666 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000668 │ │ └── surfacePlane_n2_totalPressure │ ├── 0.000696 │ │ └── surfacePlane_n2_totalPressure │ └── 0.000699 │ └── surfacePlane_n2_totalPressure ├── swakExpression_surfacePlane_n2_velocity │ ├── 0 │ │ └── surfacePlane_n2_velocity │ ├── 0.000124 │ │ └── surfacePlane_n2_velocity │ ├── 0.000231 │ │ └── surfacePlane_n2_velocity │ ├── 0.000239 │ │ └── surfacePlane_n2_velocity │ ├── 0.0003 │ │ └── surfacePlane_n2_velocity │ ├── 0.000475 │ │ └── surfacePlane_n2_velocity │ ├── 0.00049 │ │ └── surfacePlane_n2_velocity │ ├── 0.00053 │ │ └── surfacePlane_n2_velocity │ ├── 0.000539 │ │ └── surfacePlane_n2_velocity │ ├── 0.000544 │ │ └── surfacePlane_n2_velocity │ ├── 0.000558 │ │ └── surfacePlane_n2_velocity │ ├── 0.000563 │ │ └── surfacePlane_n2_velocity │ ├── 0.000616 │ │ └── surfacePlane_n2_velocity │ ├── 0.000652 │ │ └── surfacePlane_n2_velocity │ ├── 0.000666 │ │ └── surfacePlane_n2_velocity │ ├── 0.000668 │ │ └── surfacePlane_n2_velocity │ ├── 0.000696 │ │ └── surfacePlane_n2_velocity │ └── 0.000699 │ └── surfacePlane_n2_velocity ├── swakExpression_surfacePlane_n3_pressure │ ├── 0 │ │ └── surfacePlane_n3_pressure │ ├── 0.000124 │ │ └── surfacePlane_n3_pressure │ ├── 0.000231 │ │ └── surfacePlane_n3_pressure │ ├── 0.000239 │ │ └── surfacePlane_n3_pressure │ ├── 0.0003 │ │ └── surfacePlane_n3_pressure │ ├── 0.000475 │ │ └── surfacePlane_n3_pressure │ ├── 0.00049 │ │ └── surfacePlane_n3_pressure │ ├── 0.00053 │ │ └── surfacePlane_n3_pressure │ ├── 0.000539 │ │ └── surfacePlane_n3_pressure │ ├── 0.000544 │ │ └── surfacePlane_n3_pressure │ ├── 0.000558 │ │ └── surfacePlane_n3_pressure │ ├── 0.000563 │ │ └── surfacePlane_n3_pressure │ ├── 0.000616 │ │ └── surfacePlane_n3_pressure │ ├── 0.000652 │ │ └── surfacePlane_n3_pressure │ ├── 0.000666 │ │ └── surfacePlane_n3_pressure │ ├── 0.000668 │ │ └── surfacePlane_n3_pressure │ ├── 0.000696 │ │ └── surfacePlane_n3_pressure │ └── 0.000699 │ └── surfacePlane_n3_pressure ├── swakExpression_surfacePlane_n3_Temperature │ ├── 0 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000124 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000231 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000239 │ │ └── surfacePlane_n3_Temperature │ ├── 0.0003 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000475 │ │ └── surfacePlane_n3_Temperature │ ├── 0.00049 │ │ └── surfacePlane_n3_Temperature │ ├── 0.00053 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000539 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000544 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000558 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000563 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000616 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000652 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000666 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000668 │ │ └── surfacePlane_n3_Temperature │ ├── 0.000696 │ │ └── surfacePlane_n3_Temperature │ └── 0.000699 │ └── surfacePlane_n3_Temperature
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
May 1, 2013, 16:00 |
|
#15 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
I forgot you probably had something complicated like that... where you have not just one time folder per sample, but in fact dozens of time folders per sample...
Well, it's both simple and completely different from my previous answer . The following instructions depend on the script made on the other thread http://www.cfd-online.com/Forums/ope...tml#post422410 (both posts #68 and #71):
__________________
|
|
May 2, 2013, 09:30 |
|
#16 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
thank you.how is it possible to do this on probes in that is in postProcessing folder?
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
May 2, 2013, 09:35 |
|
#17 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Sorry, I don't understand the question. Can you describe what you have and what you want to achieve?
__________________
|
|
May 2, 2013, 10:21 |
|
#18 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
like before folders but some difference in arrangement.each time folder has 3 files,T,U.I want to accumulate all times in 0 folder like other post processing folders we had until now.
summarily its better to have only one folder with p,T and U files that are from time 0 till end of the run.
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
May 2, 2013, 10:27 |
|
#19 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Is this what you mean?
Code:
./mergeOutputFolderWith0 probes U > myNeatResults/U Code:
./mergeOutputFolderWith0 postProcessing/probes U > myNeatResults/U
__________________
|
|
May 2, 2013, 11:28 |
|
#20 |
Senior Member
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 26 |
thanks.that works fine now.
it has became this if someone wants to use such a verbose output in future: Code:
#!/bin/bash mkdir myNeatResults ./merge swakExpression_flowInlet flowInlet > myNeatResults/flowInlet ./merge swakExpression_flowOutlet flowOutlet > myNeatResults/flowOutlet ./merge swakExpression_pressure_right pressure_right > myNeatResults/pressure_right ./merge swakExpression_Temperature_right Temperature_right > myNeatResults/Temperature_right ./merge swakExpression_total_pressure_right total_pressure_right > myNeatResults/total_pressure_right ./merge swakExpression_velocity_right velocity_right > myNeatResults/velocity_right ./merge swakExpression_pressure_left pressure_left > myNeatResults/pressure_left ./merge swakExpression_Temperature_left Temperature_left > myNeatResults/Temperature_left ./merge swakExpression_total_pressure_left total_pressure_left > myNeatResults/total_pressure_left ./merge swakExpression_velocity_left velocity_left > myNeatResults/velocity_left ./merge swakExpression_sP_h1_pressure sP_h1_pressure > myNeatResults/sP_h1_pressure ./merge swakExpression_sP_h1_Temperature sP_h1_Temperature > myNeatResults/sP_h1_Temperature ./merge swakExpression_sP_h1_totalPressure sP_h1_totalPressure > myNeatResults/sP_h1_totalPressure ./merge swakExpression_sP_h1_velocity sP_h1_velocity > myNeatResults/sP_h1_velocity ./merge swakExpression_sP_h2_pressure sP_h2_pressure > myNeatResults/sP_h2_pressure ./merge swakExpression_sP_h2_Temperature sP_h2_Temperature > myNeatResults/sP_h2_Temperature ./merge swakExpression_sP_h2_totalPressure sP_h2_totalPressure > myNeatResults/sP_h2_totalPressure ./merge swakExpression_sP_h2_velocity sP_h2_velocity > myNeatResults/sP_h2_velocity ./merge swakExpression_sP_h3_pressure sP_h3_pressure > myNeatResults/sP_h3_pressure ./merge swakExpression_sP_h3_Temperature sP_h3_Temperature > myNeatResults/sP_h3_Temperature ./merge swakExpression_sP_h3_totalPressure sP_h3_totalPressure > myNeatResults/sP_h3_totalPressure ./merge swakExpression_sP_h3_velocity sP_h3_velocity > myNeatResults/sP_h3_velocity ./merge swakExpression_sP_n1_pressure sP_n1_pressure > myNeatResults/sP_n1_pressure ./merge swakExpression_sP_n1_Temperature sP_n1_Temperature > myNeatResults/sP_n1_Temperature ./merge swakExpression_sP_n1_totalPressure sP_n1_totalPressure > myNeatResults/sP_n1_totalPressure ./merge swakExpression_sP_n1_velocity sP_n1_velocity > myNeatResults/sP_n1_velocity ./merge swakExpression_sP_n2_pressure sP_n2_pressure > myNeatResults/sP_n2_pressure ./merge swakExpression_sP_n2_Temperature sP_n2_Temperature > myNeatResults/sP_n2_Temperature ./merge swakExpression_sP_n2_totalPressure sP_n2_totalPressure > myNeatResults/sP_n2_totalPressure ./merge swakExpression_sP_n2_velocity sP_n2_velocity > myNeatResults/sP_n2_velocity ./merge swakExpression_sP_n2_Maxp sP_n2_Maxp > myNeatResults/sP_n2_Maxp ./merge swakExpression_sP_n2_MaxU sP_n2_MaxU > myNeatResults/sP_n2_MaxU ./merge swakExpression_sP_n3_pressure sP_n3_pressure > myNeatResults/sP_n3_pressure ./merge swakExpression_sP_n3_Temperature sP_n3_Temperature > myNeatResults/sP_n3_Temperature ./merge swakExpression_sP_n3_totalPressure sP_n3_totalPressure > myNeatResults/sP_n3_totalPressure ./merge swakExpression_sP_n3_velocity sP_n3_velocity > myNeatResults/sP_n3_velocity ./merge postProcessing/probes U > myNeatResults/U ./merge postProcessing/probes T > myNeatResults/T ./merge postProcessing/probes p > myNeatResults/p
__________________
Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
post processing for CEL expressions | Niru | CFX | 0 | May 10, 2013 13:13 |
Automated post processing using CFD Post | shreyasr | ANSYS | 0 | January 28, 2013 06:21 |
CFD post processing techniques & streamlining | klk | Main CFD Forum | 0 | October 19, 2010 07:37 |
fluent for post processing | James | FLUENT | 0 | April 21, 2006 04:43 |
post processing in CFD | MANISH BHARGAVA | Main CFD Forum | 0 | October 17, 1998 20:51 |