|
[Sponsors] |
no match for ‘operator+’ in ‘Foam::operator*(const Foam::tmp<Foam::GeometricField |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 27, 2013, 03:46 |
no match for ‘operator+’ in ‘Foam::operator*(const Foam::tmp<Foam::GeometricField
|
#1 |
New Member
guanning
Join Date: Mar 2013
Posts: 2
Rep Power: 0 |
HI Foamers:
I added a source term (momSource) to the momentum equation of NS in interFoam to generate waves, the definition of momSource is in the createFields.H: /home/caelinux/Desktop/Screenshot-13.png and modified the pEqn.H and UEqn.H as follows: /home/caelinux/Desktop/Screenshot-14.png /home/caelinux/Desktop/Screenshot-15.png but,when I comiled it the following erros are being produced: /home/caelinux/Desktop/Screenshot-16.png I would appreciate if you help me fix it! |
|
Tags |
momsource |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
area does not match neighbour by ... % -- possible face ordering problem | St.Pacholak | OpenFOAM | 10 | February 7, 2024 21:50 |
[ANSYS Meshing] Match Control, is this weird or am I stupid? | Moufle | ANSYS Meshing & Geometry | 2 | November 18, 2015 16:00 |
Match Control and Symmetry Boundary Condtions in a quasi 2D calculation | peterputer | ANSYS Meshing & Geometry | 0 | May 15, 2012 08:53 |
gmsh2ToFoam | sarajags_89 | OpenFOAM | 0 | November 24, 2009 22:50 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |