CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Programming & Development

compressibleTwoPhaseEulerFoam: convergence problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 20, 2014, 06:01
Default compressibleTwoPhaseEulerFoam: convergence problem
  #1
New Member
 
simone colucci
Join Date: May 2014
Location: Pisa (Italy)
Posts: 4
Rep Power: 4
simone1981 is on a distinguished road
Dear all,
I found the following problem in adding source terms in compressibleTwoPhaseEulerFoam:
when I add a source term in UEqns it is ok, when I try to add appropriate source terms in any other equation there are problems in converging. For example adding in EEqns .H

- fvm::Sp( (gamma/rho1), he1 ) - (gamma/rho1)*K1

in he1Eqn e

- fvm::Sp( (gamma/rho2), he2 ) - (gamma/rho2)*K2 in EEqns

in he2Eqn (you can do the same adding any other different term) I have:

--> FOAM FATAL ERROR:
Maximum number of iterations exceeded

Why?

Thank you in advance
Simone
simone1981 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Convergence Problem in Axisymmetric Periodic Flow atheresia FLUENT 3 February 10, 2014 04:00
Force can not converge colopolo CFX 13 October 4, 2011 22:03
convergence problem when use pisoFoam, LES for wind tunnel case Forrest_Lei OpenFOAM 3 July 19, 2011 06:00
Convergence of CFX field in FSI analysis nasdak CFX 2 June 29, 2009 01:17
Non Convergence of 3D Heat transfer cfd problem Balraj Main CFD Forum 3 December 9, 2004 01:24


All times are GMT -4. The time now is 01:18.