CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

stoichiometric condition but CO is too high

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 22, 2014, 20:27
Default stoichiometric condition but CO is too high
  #1
New Member
 
Join Date: Jan 2014
Posts: 6
Rep Power: 4
IColin is on a distinguished road
Hi,

I apply chemkin to the reactingFoam to simulate the combustion of isooctane under stoichiometric condition. The mixture is homogeneous and to be simple I set that there is no turbulence in the cubic volume. All the boundaries are wall boundary. The reaction will explode in a very short time. The temperature will go up to a certain value and the amount of isooctane will decrease to zero. That means reaction occurs. However, the amount of CO is much higher than CO2. So, can anyone tell me what is happening during the process? Thanks so much and wish you have a good time every day.

Best Regards,
Colin
IColin is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No-slip condition for non-resolved boundary layer in open channel banks AlbertoVe Main CFD Forum 1 January 17, 2013 04:11
Boundary condition clarification shaswat CFX 1 April 8, 2012 04:06
how to understand high resolution scheme and high order scheme iilw1314 Main CFD Forum 3 September 30, 2010 10:43
boundary condition for high order Possion solver jen Main CFD Forum 0 November 16, 2005 20:04
boundary condition for high order possion solver *NM* jen Main CFD Forum 0 November 16, 2005 20:02


All times are GMT -4. The time now is 03:55.