 |
 |
 |
|
|
|
[Sponsors] | ||||
December 1, 2019, 01:17
|
I need help setting boundary conditions
|
#1 |
|
New Member
Andrew Lindsay
Join Date: Mar 2009
Location: Perth, Western Australia
Posts: 24
Rep Power: 17  |
I am still working on making my first real world simulation. This is meant to be a solid only composite heat transfer problem.
My case files are available here. https://login.filesanywhere.com/fs/v...8b5a5e6db4a2ab The log and error file are attached. Any assistance that you can give on how to solve this issue would be greatly appreciated. |
|
|
|
|
|
December 2, 2019, 01:48
|
|
#2 |
|
Senior Member
Join Date: Jun 2012
Location: Germany, Bochum
Posts: 230
Rep Power: 15 |
You have defined a boundary as wedge and empty at the same time. Check your files in the 0 directory and probably in constant/polyMesh/boundary
|
|
|
|
|
|
|
December 2, 2019, 01:59
|
|
#3 |
|
New Member
Andrew Lindsay
Join Date: Mar 2009
Location: Perth, Western Australia
Posts: 24
Rep Power: 17 |
Ok, so for an axisymmetric case should it be wedge or empty?
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CFD analaysis of Pelton turbine | amodpanthee | CFX | 31 | April 19, 2018 18:02 |
| Velocity vector in impeller passage | ngoc_tran_bao | CFX | 24 | May 3, 2016 21:16 |
| Difficulty In Setting Boundary Conditions | Moinul Haque | CFX | 4 | November 25, 2014 17:30 |
| [snappyHexMesh] determining displacement for added points | CFDnewbie147 | OpenFOAM Meshing & Mesh Conversion | 1 | October 22, 2013 09:53 |
| Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Linear Mode
