|
[Sponsors] |
May 8, 2008, 02:44 |
Hello Kraposhin and Philippose
|
#11 |
Member
Leonardo Nettis
Join Date: Mar 2009
Posts: 72
Rep Power: 17 |
Hello Kraposhin and Philippose:
- As I aforesaid the iteration process keeps this strange behaviour also in the case turbulence is set "on"! - Re=1e6.... Isn't LaunderSharmaKE a low Reynolds number turbulence model? - Therefore a compressible case is less sensitive to an eventual 2D mesh with BIG PROBLEMS?? (why do you think I have "HAR not due to z-depth"??) - you can download the mesh here: http://www.grc.nasa.gov/WWW/wind/val.../raetaf04.html Once you have this 2D mesh it is possible to import it in OF using plot3dToFoam (the last version created by mattjis janssenn and available on the forum) imposing the 3rd direction size. I'll try to modify both PISO and non-orthogonal correctors and if I'll still have problems I'll make some corrections to the grid, although I sincerely do not know what I can change... Thank you very much!! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with turbFoam | skabilan | OpenFOAM Running, Solving & CFD | 2 | September 29, 2008 17:43 |
Turbfoam error | danie | OpenFOAM Running, Solving & CFD | 2 | July 30, 2008 07:45 |
TurbFoam | hsieh | OpenFOAM Running, Solving & CFD | 12 | July 23, 2008 07:40 |
Error turbFoam | jackdaniels83 | OpenFOAM Running, Solving & CFD | 11 | June 27, 2007 14:22 |
Oodles vs turbFoam | rolando | OpenFOAM Running, Solving & CFD | 9 | June 4, 2007 05:42 |