CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Running, Solving & CFD

Help on segmentation fault with pimpleDyMFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 13, 2012, 13:15
Default Help on segmentation fault with pimpleDyMFoam
  #1
Member
 
Elh. A2. BAH
Join Date: Jan 2012
Posts: 64
Rep Power: 5
ebah6 is on a distinguished road
Dear all,

I am using pimpleDyMFoam in OF-2.1.0 with rotating parts.

My geometry is obtained from pointwise which gives me 5 files that I put in the constant/polyMesh directory. I modified some of the boundary conditions to be able to visualize the grid with paraFoam.

Now that I execute the pimpleDyMFoam command, I receive the following errors at the fisrt time step :
-------------------------------------------

Create mesh for time = 0

Selecting dynamicFvMesh solidBodyMotionFvMesh
Selecting solid-body motion function rotatingMotion
Applying solid body motion to cellZone bladesAndRotor
#0 Foam::error:rintStack(Foam::Ostream&) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1 Foam::sigSegv::sigHandler(int) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2 in "/lib/x86_64-linux-gnu/libc.so.6"
#3 Foam::solidBodyMotionFvMesh::solidBodyMotionFvMesh (Foam::IOobject const&) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libdynamicFvMesh.so"
#4 Foam::dynamicFvMesh::addIOobjectConstructorToTable <Foam::solidBodyMotionFvMesh>::New(Foam::IOobjec t const&) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libdynamicFvMesh.so"
#5 Foam::dynamicFvMesh::New(Foam::IOobject const&) in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/lib/libdynamicFvMesh.so"
#6
in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/bin/pimpleDyMFoam"
#7 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#8
in "/home/alpha/OpenFOAM/OpenFOAM-2.1.0/platforms/linux64GccDPOpt/bin/pimpleDyMFoam"
Segmentation fault

----------------------------

Have some already encountered this type of issue and/or is able to help me out?

Thank you all for your time.

My best regards.
ebah6 is offline   Reply With Quote

Old   February 18, 2012, 11:12
Default
  #2
Member
 
Onno
Join Date: Jan 2012
Location: Germany
Posts: 93
Rep Power: 6
Kaskade is on a distinguished road
I've been trying to set up a case analogous to the propeller tutorial. I get a similar error.

I have used stl geometries and snappyHexMesh to generate the mesh. Except for some skewed cells checkMesh doesn't complain.
Kaskade is offline   Reply With Quote

Old   July 5, 2013, 07:27
Default
  #3
Senior Member
 
Artur's Avatar
 
Artur
Join Date: May 2013
Location: Southampton, UK
Posts: 226
Rep Power: 6
Artur is on a distinguished road
I think I know what your problem is. See this post:

pimpleDyMFoam issue

(you renamed your cellZone too as far as I can tell from the snippet you posted)
Artur is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Segmentation Fault Shawn_A OpenFOAM Running, Solving & CFD 6 October 31, 2011 15:38
Segmentation fault when running dieselFoam or dieselEngineFoam in parallel francesco OpenFOAM Bugs 3 June 10, 2011 09:30
Paraview - Segmentation fault grjmell OpenFOAM 1 March 23, 2011 17:41
ParaView segmentation fault only for multiphase gwierink OpenFOAM 9 March 25, 2010 08:23
KIVA and Segmentation Fault Felix Main CFD Forum 2 January 18, 2006 02:24


All times are GMT -4. The time now is 14:13.