|
[Sponsors] |
Extrapolation of values in axisymmetric geometry |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 5, 2012, 07:46 |
Extrapolation of values in axisymmetric geometry
|
#1 |
New Member
Julie Marie
Join Date: Oct 2012
Location: Trondheim, Norway
Posts: 3
Rep Power: 13 |
Hi,
working on a case where entrance length in laminar pipe flow is evaluated for different meshes. When using an axisymmetric geometry the value for U will be slightly off-center, so I would like to extrapolate values from the outer cells to predict the correct velocity in the center of the pipe. Any ideas on how to do this? Is it better to export data from openFOAM to ex. MATLAB and then perform the extrapolation? Thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
axisymmetric geometry within engineFoam | antonellaP | OpenFOAM | 4 | August 30, 2012 04:55 |
[Gmsh] Problem meshing an imported geometry | Alicia | OpenFOAM Meshing & Mesh Conversion | 0 | March 30, 2010 04:53 |
vitual _ real | deneb | FLUENT | 3 | January 22, 2007 04:31 |
node values or cell values? | aPpA | FLUENT | 0 | November 10, 2006 08:56 |
Meshing axisymmetric geometry | Prachi | CFX | 4 | May 23, 2006 04:46 |