wall heat flux boundary condition & Nu number

anasz · December 19, 2014, 19:11

Hello everyone,

I am wondering if there is available a constant wall heat flux boundary condition in openfoam (will be used within rhosimpleFoam) and how to calculate Nusselt number.

Many thanks in advance

kmefun · December 23, 2014, 18:36

Quote:

Originally Posted by anasz

Hello everyone,

I am wondering if there is available a constant wall heat flux boundary condition in openfoam (will be used within rhosimpleFoam) and how to calculate Nusselt number.

Many thanks in advance

you can check this boundary condition to see if this works for your case.
http://foam.sourceforge.net/docs/cpp/a10209_source.html

December 19, 2014, 19:11	wall heat flux boundary condition & Nu number	#1
anasz New Member anas Join Date: Dec 2014 Posts: 4 Rep Power: 11	Hello everyone, I am wondering if there is available a constant wall heat flux boundary condition in openfoam (will be used within rhosimpleFoam) and how to calculate Nusselt number. Many thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
setting wall heat flux boundary condition	elah599	OpenFOAM Running, Solving & CFD	1	November 26, 2016 18:04
foam-extend_3.1 decompose and pyfoam warning	shipman	OpenFOAM	3	July 24, 2014 08:14
Cluster ID's not contiguous in compute-nodes domain. ???	Shogan	FLUENT	1	May 28, 2014 15:03
Temperature and heat flux wall boundary condition	L. Hamid	Main CFD Forum	3	February 22, 2014 21:10
How to set the Heat Flux boundary condition at Outlet	creddy_trddc	CFX	3	September 21, 2011 07:44