erosion simulation with openfoam

mazdak · February 15, 2016, 14:39

Dear colleagues,
is there any tutorial on Lagrangian particle tracking/erosion modeling utilizing OpenFoam? I really appreciate it, if you help me with this question.

thanks

rupole1185 · February 15, 2016, 14:41

I once run a simulation with wall erosion .. It was rather a qualitative analysis though

mazdak · February 15, 2016, 14:43

is it possible to provide me the material you used? or the case set up?

rupole1185 · February 15, 2016, 14:47

Well ..I can't provide you the material (its my company ownership) ... I can tell you I used the MPPICFoam solver (eulerian Lagrangian) and I had to add some bit at the bottom of kinematicCloudProperties...

harsha_kulkarni · November 3, 2017, 14:59

http://www.tfd.chalmers.se/~hani/kur...ing_report.pdf

knolmar · November 11, 2022, 06:34

Dear Harsha!
Can you make the http://www.tfd.chalmers.se/~hani/kur...ing_report.pdf
file agin live?
thank you
Marcell Knolmar, Hungary, Budapest

harsha_kulkarni · November 11, 2022, 06:46

Quote:

Originally Posted by knolmar

Dear Harsha!
Can you make the http://www.tfd.chalmers.se/~hani/kur...ing_report.pdf
file agin live?
thank you
Marcell Knolmar, Hungary, Budapest

You can find it on this page along with source code
http://www.tfd.chalmers.se/~hani/kurser/OS_CFD/

knolmar · November 13, 2022, 14:13

Thank you, it is very valuable for me. Needs a lot of time to review.

February 15, 2016, 14:39	erosion simulation with openfoam	#1
mazdak Senior Member MAZI Join Date: Oct 2009 Posts: 103 Rep Power: 16	Dear colleagues, is there any tutorial on Lagrangian particle tracking/erosion modeling utilizing OpenFoam? I really appreciate it, if you help me with this question. thanks

February 15, 2016, 14:41		#2
rupole1185 Member Ruggero Poletto Join Date: Nov 2013 Posts: 34 Rep Power: 12	I once run a simulation with wall erosion .. It was rather a qualitative analysis though __________________ ___________________________ President of CONSELF, the new CFD company with a great cloud solution. Try for free it here!

February 15, 2016, 14:47		#4
rupole1185 Member Ruggero Poletto Join Date: Nov 2013 Posts: 34 Rep Power: 12	Well ..I can't provide you the material (its my company ownership) ... I can tell you I used the MPPICFoam solver (eulerian Lagrangian) and I had to add some bit at the bottom of kinematicCloudProperties... __________________ ___________________________ President of CONSELF, the new CFD company with a great cloud solution. Try for free it here!

November 3, 2017, 14:59		#5
harsha_kulkarni Senior Member harshawardhank Join Date: Mar 2014 Posts: 209 Rep Power: 13	http://www.tfd.chalmers.se/~hani/kur...ing_report.pdf fumiya, student666 and alainislas like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
error to check simulation result: could not find valid OpenFOAM mesh	xiaoyoyo	OpenFOAM	5	May 18, 2017 11:38
OpenFOAM v3.0.1 Training, London, Houston, Berlin, Jan-Mar 2016	cfd.direct	OpenFOAM Announcements from Other Sources	0	January 5, 2016 03:18
Which turbulence model is applicable for Plain diffuser flow simulation in openFOAM?	mukut	OpenFOAM Running, Solving & CFD	4	January 30, 2015 08:06
diesel Engine simulation in OpenFOAM	karam	OpenFOAM Running, Solving & CFD	1	March 1, 2011 09:46
erosion in pipe's elbow simulation	Fluid Engineer	FLUENT	1	December 4, 2010 06:32

February 15, 2016, 14:43		#3
mazdak Senior Member MAZI Join Date: Oct 2009 Posts: 103 Rep Power: 16	is it possible to provide me the material you used? or the case set up?

November 11, 2022, 06:34		#6
knolmar New Member knolmar Join Date: Nov 2022 Posts: 2 Rep Power: 0	Dear Harsha! Can you make the http://www.tfd.chalmers.se/~hani/kur...ing_report.pdf file agin live? thank you Marcell Knolmar, Hungary, Budapest

November 13, 2022, 14:13		#8
knolmar New Member knolmar Join Date: Nov 2022 Posts: 2 Rep Power: 0	Thank you, it is very valuable for me. Needs a lot of time to review.